Advertisement
This command sets the volume.
Command:
03H 10H 00H 00H 05H DATA01 .. DATA05 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01
05H fixed
DATA02
Setting items
00H : Volume
01H : Bass
02H : Treble
03H : Balance
DATA03
Setting mode
00H : Absolute value specification
01H : Relative value specification
DATA04
Setting Value (Lower ranking 8 bits)
DATA05
Setting Value (Upper ranking 8 bits)
Response: At the time of a success
23H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 Results
0000H : Normal
0000H Other : Error
Response: At the time of a failure
A3H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1)
(*2)
Command example:
* Setting Volume to "10"
03H 10H 00H 00H 05H 05H 00H 00H 0AH 00H 27H
030-12. IMAGE MODE ADJUST
**********************************************************************
Function:
This command adjusts the Image Mode.
Command:
03H 10H 00H 00H 05H DATA01 .. DATA05 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 Adjustment items
DATA01 DATA02 Adjustment items
18H
DATA03
Adjustment mode
00H : Absolute value specification
01H : Relative value specification
DATA04
Adjustment value (Lower ranking 8 bits)
(*3)
(*4)
(*3)
00H
Aspect Ratio Input (!)
(*3)
(*3)
Advertisement
