EWM SATURN MIG 250 Operating Manual

Operating Manual
SATURN MIG 200, MIG 200 PROGRAM
SATURN MIG 250, MIG 250 PROGRAM
SATURN MIG 300, MIG 300 PROGRAM
The operating manual must be read before using the machine!
It can be dangerous to ignore this!
The machine may only be used by personnel who are familiar with appropriate regulations!
This machine bears the CE-mark and thus confroms with the
·
EU-low voltage guidelines (73/23/EWG)
·
EU-EMV- guidelines (89/336/EWG)
(The CE-mark is only required in countries which are members of the European Union).
Units may be used in accordance with VDE 0544 (EN 60974-1) in areas where increased
S
electrical danger exists.
ã ã ã ã 2000
Subject to technical change!
EWM HIGHTEC WELDING GmbH
Dr.-Günter - Henle - Straße 8; D-56271 Mündersbach
Phone: +49 (0)2680.181-0; Fax: +49 (0)2680.181-244
Internet:
SATURN MIG 200 - 300
SATURN MIG 200 - 300 PROGRAM
for Standard MIG/MAG Welding.
Art. Nr.: 099-004305-EWM01
www.ewm.de info@ewm.de
; E-mail:
GB
Stand: 28.08.2000