Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Stihl E 180 C
Summarization of Contents
2. SPECIFICATIONS
2.1 Motor
Details about the motor specifications including type, rating, voltage, current, and protection.
2.2 Gear Drive
Specifies the type of gear drive and output speed for different load conditions.
2.3 Cutting Attachment
Information on the chain sprocket, chain lubrication system, and oil tank capacity.
2.4 Tightening Torques
Lists torque values for various fasteners used in the chainsaw assembly.
3. WIRING DIAGRAM/DESCRIPTION
Chain brake
Explains the function and operation of the chain brake system.
Coasting brake
Describes the function of the coasting brake mechanism.
4. REMOVING AND INSTALLING ELECTRICAL COMPONENTS
4.1 Connecting Cord
Detailed steps for removing and installing the connecting power cord.
4.2 Trigger Switch
Instructions for removing and installing the trigger switch.
4.3 Capacitor (230 V only)
Procedure for removing and installing the capacitor, specific to 230V models.
4.4 Overload Circuit Breaker (E 160, E 180 C)
Steps for removing and installing the overload circuit breaker on specific models.
4.5 Chain Brake Switch
Procedure for removing and installing the chain brake switch.
5. MOTOR
5.1 Carbon Brushes
Steps for removing and installing the motor's carbon brushes.
5.2 Rotor
Instructions for removing and installing the motor's rotor.
5.3 Rotor Bearing
Details on how to examine and replace the rotor bearing.
5.4 Fanwheel
Procedure for removing and installing the fanwheel.
5.5 Stator
Steps for removing and installing the motor's stator.
6. CHAIN DRIVE
6.1 Chain Sprocket
Procedure for removing and installing the chain sprocket.
6.2 Ring Gear and Pinion
Steps for removing and installing the ring gear and pinion.
6.3 Gear Housing
Instructions for removing and installing the gear housing.
7. CHAIN TENSIONER
7.1 Front Chain Tensioner
Steps for removing and installing the front chain tensioner.
7.2 Side Chain Tensioner
Procedure for removing and installing the side chain tensioner.
7.3 Quick Chain Tensioner
Procedure for removing and installing the quick chain tensioner.
8. CHAIN BRAKE
8.1 Removal
Steps for removing the chain brake components.
8.2 Installation
Steps for installing the chain brake mechanism.
9. CHAIN LUBRICATION
9.1 Oil Tank
Procedure for removing and installing the oil tank.
9.2 Oil Strainer
Steps for removing and installing the oil strainer.
9.3 Oil Pump
Procedure for removing and installing the oil pump.
10. SPECIAL SERVICING TOOLS AND AIDS
10.1 Special Servicing Tools
Lists special tools, their part numbers, and applications.
10.2 Servicing Aids
Lists servicing aids, their part numbers, and applications.
Need help?
Do you have a question about the E 180 C and is the answer not in the manual?
Questions and answers