Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Osprey Talon G2
Summarization of Contents
Getting Started
Prerequisites
Conditions and items required before connecting and setting up the encoder.
Introducing Osprey Talon Decoder
Osprey Talon Decoder Product Identification
Details and diagrams identifying the front panels of Talon G1 and G2 models.
Osprey Talon G1 Front Panel Diagram
Osprey Talon Back Panel Diagram
Illustration and labels for the back panel connectors of the Talon G1.
Web Interface
Login
Steps to access the Talon's web interface using a web browser and IP address.
Tab Navigation
System Control Tab
Access to administrative functions like IP setup, device name, password, and firmware updates.
Status Tab
Displays real-time information regarding streams and inputs.
Stream Tab
Contains streaming settings for output streams, including source and output setup.
Device Management
Set Name
How to create a unique name for the Talon to distinguish multiple units.
Set Password
Procedure for changing the default password to enhance device security.
Reboot
Instructions for performing a complete power reset of the device.
Update Firmware
Updating via the Talon Web page
Step-by-step guide to download and upload firmware updates through the web interface.
Display Setup
Display Mode
Configures output resolution and layout for the decoder.
Resolution
Sets the output resolution to match the display monitor or television.
Decoder Setup
Options
Settings for Autostart feature to enable unattended recovery.
Input Type
Selection of input protocols like RTP, UDP, and Zixi Receiver.
Zixi Receiver
Audio
Selection of output port (SDI or HDMI) for audio when audio output is enabled.
Decode from file
Channel Control Buttons
Controls for managing streams: stop, start, clone, and delete.
Clone Stream
Creates a copy of an existing stream configuration for minor modifications.
Delete Stream
Removes a selected stream configuration from the device.
Appendix 1: Osprey BOSS
Installing Osprey BOSS
Steps to download and install the Osprey BOSS utility for different operating systems.
Additional Operations from BOSS
Reboot Talon via BOSS
How to remotely reboot a Talon device using the BOSS utility.
Set Temporary IP via BOSS
Procedure to assign a temporary IP address to access the web GUI.
Clear Configuration via BOSS
How to remove all encoder configurations from the Talon using BOSS.
Clear System via BOSS
Set Recovery IP Address via BOSS
Utility to assign a temporary IP address for accessing the Web GUI when the current IP is unreachable.
Safety and Compliance
FCC Notice
Regulatory statement regarding compliance with FCC rules for digital devices.
Need help?
Do you have a question about the Talon G2 and is the answer not in the manual?
Questions and answers