Download Print this page

Advertisement

Quick Links

INSTALLING THE LFQ 45
STEP 1: Locating the Connector
A. Remove the LFQ 45 from the packaging
and inspect the circuit board.
B. Locate the right angle header connector sol-
dered on the front of the circuit board. See
illustrations 3
C. Tip the LFQ 45 on end and view the right
angle header connector. Notice that one of the
openings on the header connector is blocked
by white filler material. The LFQ 45's mount-
ing system utilizes this blocked receptacle as
the "key" to insure proper positioning when
installing it onto the amplifier's mounting
port. See illustration 1.
RIGHT ANGLE
HEADER CONNECTOR
CIRCUIT BOARD
illustration 1
3.25 x 4.25
INSTALLING THE LFQ 45
STEP 2: Adjusting the LFQ 45
A. The LFQ 45 provides +4, +8 or +12 dB of Bass
Boost at 45 Hz with a "Q" of 3. This frequency
and "Q" combination was chosen to enhance
overall bass response. To adjust the level of Bass
Boost, move the LFQ 45's jumper to one of the
three available positions. See illustration 2
B. Make your initial Bass Boost adjustment to the
LFQ 45 prior to installing the module in the
amplifier. We suggest starting with the jumper in
the +8 dB position.
C. After listening to your initial setting, if you
wish to adjust the Bass Boost, turn the amplifier
off prior to moving the Bass Boost Jumper. Simply
move the jumper to +4 dB to decrease or +12 dB
to increase the bass output.
"
"
LOCATING
KEY
BASS BOOST JUMPER
+4 dB
+8 dB
+12 dB
illustration 2
INSTALLING THE LFQ 45
STEP 3: Plugging-in the LFQ 45
BASS BOOST JUMPER
+4 dB
+8 dB
+12 dB
xtant
LFQ 45
RIGHT ANGLE
HEADER CONNECTOR
ACCESSORY PORT
A. Turn-off amplifier. Remove amplifier cover and
locate the Accessory Port.
B. Remove the two header jumpers and locate the
missing pin ("key") on the port.
C. Align the blocked receptacle with the missing pin
and press the LFQ 45 onto the accessory port.
D. Turn amp on and audition sound. If further adjustment
is needed, turn amp off and reposition the bass boost
jumper to achieve the desired level of bass response.
illustration 3

Advertisement

loading

Summary of Contents for Xtant LFQ 45

  • Page 1 See illustration 2 +4 dB +8 dB +12 dB illustrations 3 xtant B. Make your initial Bass Boost adjustment to the LFQ 45 RIGHT ANGLE LFQ 45 prior to installing the module in the C. Tip the LFQ 45 on end and view the right HEADER CONNECTOR amplifier.
  • Page 2 NOT be repaired and will be returned to sender, freight collect. NUMBER OF CHANNELS 5. The provisions of this warranty shall not apply to any Xtant unit used for a purpose for which it is FREQUENCY RESPONSE HZ TO not designed, which has been repaired or altered in any way, or which has been connected, installed, or adjusted other than in accordance with the instructions furnished in Xtant’s owner’s manual.