Installation Des Gerätes; Anschlüsse; Anschluss Des Gerätes - ZENEC ZE-TVA Instruction Manual

INSTALLATION DES GERÄTES
CONNECTOR LOCATIONS
ANSCHLÜSSE
ttx005 manual.qxd
1. Stromversorgung
2. Vorverstärkerausgänge (AUDIO)
3. Videoausgang (VIDEO)
1. Power Inputs
4. Anschlussbuchse für den externen IR-Empfänger
2. Audio Outputs
5. Antenneneingänge
3. Video Output
4. IR Remote Eye Input
WIRING CONNECTIONS
5. TV Antenna Inputs
ANSCHLUSS DES GERÄTES
WIRING PRECAUTIONS
Read all wiring precautions. If you are not sure of the connections,
contact your authorized Clarion Dealer.
1. Disconnect the negative(-) lead of the battery before making any
power connections.
2. When creating passage holes for the power wires, use grommets to
eliminate any sharp edges created during drilling. This will protect
the wire from being nicked and causing a short circuit.
3. When connecting the ground lead, fasten the ground lead (black)
securely to a clean metal plate on the vehicle.
ROT: +12V
ACC
3
8/11/2005 3:17 PM
SCHWARZ: MASSE
GELB: +12V
BATTERIE
Page 5
ANTENNENSYSTEM
IR-EMPFÄNGER
MONITOR
VERSTÄRKER
5
Deutsch