REMOTE CONTROL
������ �������
To use the remote control, press the power button to turn on the TV-tuner.
�� ��� ��� ������ �������� ����� ��� ����� ������ �� ���� �� ���
■
�� ������
�
�
����
���
������
�
�����
���
�����
�
����
����
�
����� ��� ������ �������
USING THE REMOTE CONTROL
��� ��������� ������ �������� ������� ��� ��� ���� ���������� ����
����� ��� ���� �����
1. POWER-button:
����� ���� �������
Press the POWER-button to turn on/off the unit.
■
����� ��� ����� �������
2. AUTO/MEMORY- button:
������ ��������
Press the AUTO/MEMORY-button to start auto searching and to store the TV stations
■
������ ��� ���� ������ ������ �������
into preset stations.
Press and hold the AUTO/MEMORY-button to select one of the following TV
■
���� �������
standards:
������ ��� ���� �� ������ ��� ��������� �������� ��� �������������
PAL-I
PAL-D/K
����� �� ���� ��� �������
➝
����� ��� ��� �������� ��� ��������� �� ��� ������ ���� �������
3. ERASE/WRITE-button
��� ���� �� �� �������� ���� �������� � ��� �����
Press the ERASE/WRITE-button to erase/store the current TV station.
■
�
4. PREV-button
Press the PREV-button to searching an available TV station by decreasing the tuning
■
frequency.
5. Numeric buttons
Press one of the numeric buttons to select a preset station.
■
�� �����
1. Power
�
�� ���� ������
2. Auto memory & setup
�
�� �����������
3. Erase / write
��
�� ��������
4. Previous
�
�� ������ ���
5. Number pad
6. Channel (
�� ������� � � � ������� � �
�
7. Volume (+)
�� ������ ���
8. Volume (–)
�� ������ � �
9. Next
�� ����
10. Mute & SND
��� ����
��
PAL-B/G
SECAM D/K
➝
➝
) / channel (
5
SECAM L/L
➝
17
English
)
6