Remote Control Battery Installation - ZENEC ZE-TVA Instruction Manual

• Number Pad. • Number Pad. • Number Pad.
Use the Number button (0-9) to select available channels Use the Number button (0-9) to select available channels Use the Number button (0-9) to select available channels
Use the (10+) button to select double numeric channels. Use the (10+) button to select double numeric channels. Use the (10+) button to select double numeric channels.
6. -buttons
[5] / [6]
Press the -button to select the next preset stations.
[5]
• Channel Selections. • Channel Selections. ■ • Channel Selections.
Press the -button to select the previous preset station.
[6]
■
Use the CH up button to select next available channel. Use the CH up button to select next available channel. Use the CH up button to select next available channel.
Use the CH down button to select the previous channel. Use the CH down button to select the previous channel. Use the CH down button to select the previous channel.
7. (VOL+)-button
Press the (VOL+)-button to increase the loudness.
■
• Erase/Write. • Erase/Write. • Erase/Write.
8. (VOL-)-button
Allows the user to selectively add or remove Television channels Allows the user to selectively add or remove Television channels Allows the user to selectively add or remove Television channels
Press the (VOL-)-button to decrease the loudness.
■
to and from the unit's memory. to and from the unit's memory. to and from the unit's memory.
9. NEXT-button
Press the NEXT-button to search an available TV station by increasing the tuning
■
• Previous. • Previous. • Previous.
frequency.
Use this button to Search The Previous Viewed Channel Use this button to Search The Previous Viewed Channel Use this button to Search The Previous Viewed Channel
10. MUTE/SND-button
Press the MUTE/SND-button to switch on/off the audio output.
■
• Next. • Next. • Next.
Use this button to Search The Next Viewed Channel Use this button to Search The Next Viewed Channel Use this button to Search The Next Viewed Channel

REMOTE CONTROL BATTERY INSTALLATION

REMOTE CONTROL BATTERY INSTALLATION REMOTE CONTROL BATTERY INSTALLATION
REMOTE CONTROL BATTERY INSTALLATION
If the remote control does not function correctly or the operating If the remote control does not function correctly or the operating If the remote control does not function correctly or the operating
range is reduced, replace the battery with a new lithium CR2025 type range is reduced, replace the battery with a new lithium CR2025 type range is reduced, replace the battery with a new lithium CR2025 type
If the remote control does not function correctly or the operating range is reduced, replace
battery. Make sure to observe the proper polarity placement. battery. Make sure to observe the proper polarity placement. battery. Make sure to observe the proper polarity placement.
the battery with a new lithium CR2025 type battery. Make sure to observe the proper
polarity placement.
1. Push tab to the right. 1. Push tab to the right. 1. Push tab to the right.
1. Push tab to the right.
Pull out the battery tray.
Pull out the battery Pull out the battery Pull out the battery
tray. tray. tray.
2 2 2
1 1 1
2. Place battery 2. Place battery 2. Place battery
2. Place battery
into the tray. into the tray.
into the tray.
into the tray.
18
3 3
3. Return tray to 3. Return tray to 3. Return tray to
3. Return tray to
remote control.
remote control. remote control. remote control.
3
6 6 6