Additional Information; Troubleshooting - ZENEC ZE-TVA Instruction Manual

ADDITIONAL INFORMATION

TROUBLESHOOTING

Before assuming malfunction of the unit, please check the following:
Problem:
No power to unit.
The picture is not clear.
The picture has double
or triple images.
The p
icture has static or
n.
lined patter
The unit does not respond to
commands.
Solution:
1. Pus
h the Power button.
2. Check the wire connections and connect them
properly.
car battery.
3. Check the
1. The reception condition is poor. This may be due
to an insufficient signal due to being in the shadow
of mountains or buildings. Check again in a location
exposed to a stronger signal.
2. Make sure that the TV antenna is connected
properly.
1. There is a signal interference. The signal might be
reflected from mountains or buildings. Check by
changing location or direction.
1. There may be effects from cars, trains, neon signs,
or other interfering signals. Check by changing
location.
1. Make sure that the battery on the remote control is
not the culprit. Change the batter
19
English
y and try again.