Denon D-AJ03 Operating Instructions Manual page 24

ENGLISH
5
When registration is completed
Press
C D
6
Starting the playback
Press
• When playback of the track last registered is completed, the unit will stop automatically.
To check which tracks are programmed
While in the stop mode, press
(or, or
• Each time the button is pressed, programmed selections
are displayed in order.
Adding tracks to the program
If a program has been previously stored,
then follow step 1 to 5 to add tracks.
✽ The new tracks will be stored after the last track of the
original program.
24
C D
(or on the remote control).
C D
(or on the remote control) to start playback.
C D
SKIP
on the remote control).
To clear the programmed selection
or
z Press
SKIP
select the input.
x While the unit is stopped in the
programmed play mode, press
the remote control.
Ejecting a CD automatically cancels the programmed
sequence.
NOTE:
• Tracks cannot be registered or deleted while the unit
is stopped or in pause mode.
C D
on the remote control and
CLEAR
on