Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Spartherm Sino City
Summarization of Contents
General Instructions
Certified Quality
Tests and declarations of performance for Spartherm stoves, including DIN EN 13240 compliance.
Damage While in Transport
Instructions for checking delivered goods for damage upon arrival and documenting any issues.
Installation Instructions
Basic Installation Requirements
Overview of national and European standards, local regulations, and specific requirements for stove installation.
Installation Site
Details prohibited locations for stove installation, such as stairways, hallways, and garages.
Installation/Assembly
General steps for installing and assembling the stove, emphasizing floor load capacity and fire protection.
Changing the Flue Gas Connection Direction
Detailed steps for altering the flue gas connection direction from top to back or side.
Combustion Air Supply
Explanation of how to supply combustion air, covering room-air-dependent and independent systems.
Fire Safety
Essential fire safety measures, including minimum clearances to walls, floors, and combustible objects.
Connecting Piece
Requirements for connecting pieces to the chimney, including material, thickness, and installation standards.
Installing Heat Storage Stones
Instructions on how to install heat storage stones, noting differences based on flue gas connection.
Installation of Water-Bearing Components
Guidance on installing water-bearing components, safety devices, and sensors by specialized companies.
Connections of Senso M H2O / Piko H2O
Details on connecting the Senso M H2O and Piko H₂O models, including transport caps and safety device usage.
Basic Requirements for Installation of H2O
Requirements for installing H₂O models in thermostatically protected systems, including filling, venting, and safety valves.
Thermal Discharge Safety Device (TAS)
Explanation of the thermal discharge safety device, its function, and installation requirements to prevent overheating.
Electrical Connection
Instructions for electrical connections, emphasizing the need for authorized specialized companies and VDE regulations.
Integration in a Heating System
Guidance on integrating the stove into a heating system, including pipe diameter and buffer tank requirements.
Return Flow Temperature Boost
Instructions on operating with return flow temperature boost and recommended components for maintaining optimal temperatures.
Operating Manual
General Information on Operation
General advice for safe stove operation, including warnings for children and handling hot surfaces.
S-Thermatik Mini
Technical details and pre-set parameters for the S-Thermatik Mini combustion control system.
Operation of the Water Heat Exchanger Senso M H2O / Piko H₂O
How to operate the water heat exchanger using the lever for different heating phases.
Combustion
Initial Commissioning
Guidance for the initial commissioning of the stove by a specialized company, including initial firing.
Combustion Air Regulation
Details on regulating combustion air using the actuating lever for different stages of heating.
Heating-Up / Firing
Step-by-step instructions for lighting and firing the stove using the recommended upper burn-up method.
Controlling Heat Output
Methods for controlling heat output by regulating fuel and air flow, with warnings against incomplete combustion.
Fuel
Wood Storage
Recommendations for proper firewood storage to ensure a moisture level below 20% for efficient burning.
Contribution to Environmental Protection
Tips for environmentally friendly stove operation, including fuel choice and combustion monitoring.
Cleaning and Care
Cleaning the Combustion Chamber/Cladding Parts
Instructions for cleaning the combustion chamber, cladding parts, and other stove components regularly.
Maintenance
General maintenance checks for door seals, combustion chamber liners, and room-air-independent stoves.
Maintenance of the Water Heat Exchanger Senso M H2O / Piko H₂O
Essential maintenance procedures for the water heat exchanger to ensure optimal efficiency and safety.
Troubleshooting
Glass Becomes Sooted Heavily, Rapidly and Unevenly
Troubleshooting steps for glass sooting, covering air supply, seals, wood quality, and chimney draught.
Fire is Difficult to Ignite
Solutions for ignition problems, including air supply, wood dryness, wood thickness, and material choice.
General Warranty Conditions
Warranty Period
Details the warranty periods for different stove components, including carcass, mechanisms, and wear parts.
Exclusions from the Warranty
Lists items and conditions not covered by the warranty, such as wear, improper use, and cosmetic damage.
Technical Data
Stove with Water-Side Connections
Provides technical data for stoves with water-side connections, including output and overpressure ratings.
Need help?
Do you have a question about the Sino City and is the answer not in the manual?
Questions and answers