Setting The Time Offset; Checking Watch Information - Fossil WRIST NET Reference Manual

Setting the time offset

Many people prefer to set their watch so that it runs a little fast. With the Time
Offset setting, you can set your watch time ahead by 5, 10, or 15 minutes. You
can use this setting, even while the time is being set automatically through the
broadcast signal of an atomic clock.
To set the time offset:
1. From the Settings mode, press Next to scroll to Time Offset, and then
press Enter.
2. Press Next until you find the offset amount you want, and then press Enter.

Checking watch information

The Watch Info setting contains technical information about your watch and your
MSN Direct service. You can use this setting to check the signal strength and
battery life status of your watch.
To view watch information:
1. From the Settings mode, press Next to scroll to Watch Info, and then
press Enter.
2. Press Next and Previous to scroll through the watch information.
3. After you finish, press Enter to return to the Settings mode.
26