Using The Timer; Setting The Timer - Fossil WRIST NET Reference Manual

Using the Timer

With the timer, a watch sound notifies you after a specific amount of time elapses.
By default, the timer is set to 5 minutes.

Setting the timer

To set the timer:
1. Press and hold Channel to go to the Time channel. Wait for the watch face
to appear.
2. Press Channel to go to the Face mode.
3. From the Face mode, press Next three times
to go to the Timer mode. The Timer appears.
Minutes and seconds appear as large numbers.
Hours appear as small numbers above the
minutes (on the left).
4. To set the minutes, press Next (Set), press
Previous or Next until you see the hour you
want, and then press Enter.
Note To move up or down in increments of 5 minutes instead of 1 minute,
press and hold Previous or Next.
5. To set the seconds, press Previous or Next until you see the seconds you
want, and then press Enter.
Note To move up or down in increments of 5 seconds instead of 1 second,
press and hold Previous or Next.
6. To set the hours, press Previous or Next until you see the hours you want,
and then press Enter.
16