1. Manuals
  2. Brands
  3. Trust Manuals
  4. Home Automation
  5. 71168
  6. Online handleiding

Trust 71168 Online Handleiding

Zigbee control station
Hide thumbs
Table of Contents

Advertisement

Quick Links

ONLINE
HANDLEIDING
www.trust.com/zigbee

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 71168 and is the answer not in the manual?

Questions and answers

Related Manuals for Trust 71168

Summary of Contents for Trust 71168

  • Page 1 ONLINE HANDLEIDING www.trust.com/zigbee...

  • Page 2: Table Of Contents

    Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION Index 1. Add a room 1.1 Edit/Delete room 2. Connect a ZigBee bulb 2.1 Connect a ZigBee Remote 2.2 Edit/Delete a device 3. Add scenes 3.1 Add/Delete action 3.2 Add/Delete delays 4 Configure timers 4.1 Edit/Delete timers...

  • Page 3: Add A Room

    Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 1. Add a room 1.1 Edit/Delete room Press the + button at the top of the screen to add a new room To edit the name of a room press the pencil button at the top of the screen Fill in a name for the room you want to add.

  • Page 4: Connect A Zigbee Bulb

    Z1 ZIGBEE CONTROL STATION 2. Connect a ZigBee bulb Select Trust Smart Home ZigBee Line and choose for ZigBee light Make sure the ZigBee bulb is close to the Control station (Within 4 metres) Put the bulb in connect mode. (Check the manual of the bulb on how to put it in connect mode) Press on a room name to open it.
  • Page 5 Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION When the ZigBee device is in connect mode press CONNECT. To change the color of a ZigBee bulb press on the color circle to open the color palette (Only for RGB or Cold/Warm bulb) The bulb is now added to your room.

  • Page 6: Connect A Zigbee Remote

    Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 2.1 Connect a ZigBee remote First reset your ZigBee remote before you connect it to the Z1. (Check the manual of the ZigBee remote The ZigBee Remote is now connected on how to reset it)

  • Page 7: Edit/Delete A Device

    Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 2.2 Edit/delete device 3. Add scenes With a scene you can trigger different devices at the same time or with an delay. To edit the name of a device first open the room which contains the device.

  • Page 8: Add/Delete Action

    Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 3.2 Add/delete delays 3.1 Add/delete actions It is possible to add a delay between actions. First add an actions like described in step 3.1 Press the ADD ACTION button to add actions to the scene.

  • Page 9: Configure Timers

    Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 4 Configure timers With a timer you can trigger one or multiple devices on a fixed time, Sunrise or Sunset. Choose the kind of start time for the timer. (In this example a fixed time is used) Press the Rules button in the menu bar Select the desired start time for the timer and press NEXT.

  • Page 10: Edit/Delete Timers

    Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 4.1 Edit/delete timer Choose the desired actions for when the timer is triggered. Press NEXT Press the pencil button the enter edit mode. A message appears asking if you want to add a timer to turn the devices OFF. Press Yes Press on the timer name to begin editing.

  • Page 11: Connect Manually

    Z1 ZIGBEE CONTROL STATION MAC: 00-00-A2-00-12-11 5. Connect manually When there is no Z1 found, it is possible to enter the MAC address manually during the registration process. Press the MANUAL button Look at the bottom of the Z1 for the MAC address.

Table of Contents