Table of Contents
Advertisement
Quick Links
- 1 How the System Works
- 2 Prepare the Collar Receiver
- 3 Prepare the Remote Transmitter
- 4 Find the Best Intensity Level for Your Dog (Training)
- 5 Match the Collar Receiver and Remote Transmitter
- 6 Program the Remote Transmitter
- 7 Install the Fence Transmitter
- 8 Frequently Asked Questions
- Download this manual
Advertisement
Table of Contents
Related Manuals for SportDOG SDF-CT
Summarization of Contents
Important Safety Information
Explanation Of Attention Words And Symbols Used In This Guide
Explains safety alert symbols and their meanings for hazard communication.
Operating Guide
Prepare & Fit Collar Receiver
Instructions for preparing and fitting the collar receiver unit onto the dog.
Program Transmitter & Install System
Steps to program the transmitter, install the fence transmitter, and lay out the boundary wire.
Test System & Place Boundary Flags
Testing the system and placing flags to define the boundary.
Training Guide - Containment
Phase 1: Boundary Flag Awareness
Initial training phase to make dog aware of boundary flags and warning beep.
Phases 2-5: Advanced Training & Monitoring
Covers continued awareness, distractions, supervision, and monitoring.
Key Definitions
Remote Transmitter & Collar Receiver Definitions
Definitions for components and functions of both transmitter and receiver.
Step :: 01 Prepare the Collar Receiver
Charge, Power, Modes & Correction Levels
Instructions for charging, powering, changing modes, and setting correction levels.
Step :: 02 Prepare the Remote Transmitter
Charge Transmitter & Understand Indicator Lights
Instructions for charging the remote transmitter and interpreting its indicator lights.
Find the Best Intensity Level for Your Dog (Training)
Finding Your Dog's Recognition Level
Method to determine the dog's recognition level for static stimulation.
Step :: 08 Change ID Codes
Program & Reset Transmitter ID Codes
Procedures for programming and resetting the remote transmitter's ID codes.
Step :: 10 Lay Out the System
Basic Planning Tips for Boundary Wire
Essential tips for planning the boundary wire layout and system design.
Step :: 11 Position the Boundary Wire
Twist, Splice, and Repair Boundary Wire
Methods for twisting, splicing, and repairing the boundary wire.
Step :: 13 Set the Boundary Width and Test the Collar Receiver
Test Boundary Width and System Functionality
Procedure for testing the system's boundary width and collar receiver operation.
Step :: 14 Install the Boundary Wire
Bury or Attach Boundary Wire
Instructions for burying the wire or attaching it to fences.
Training Guide - Containment
Phase 1: Boundary Flag Awareness
Initial training phase to make dog aware of boundary flags and warning beep.
Phase :: 05 Days 15 Thru 30 - Monitoring Your Dog
Taking Your Dog Out of the Boundary Area
Methods for safely removing the dog from the containment zone.
Frequently Asked Questions
Safety, Age, Range, and Skin Irritation FAQs
Addresses common questions about safety, age, range, and skin irritation.
Troubleshooting
Common System Issues and Solutions
Provides solutions for common problems like no response, power issues, and signal loss.
To Locate a Break in the Boundary Wire
Locating Boundary Wire Breaks
Methods for finding breaks in the boundary wire.
Terms of Use and Limitation of Liability
Product Usage Terms and Disclaimers
Outlines terms of use, proper usage, and limitations of liability.
Compliance
FCC & IC Compliance Information
Details regulatory compliance for the USA and Canada.
Two Year Non-Transferrable Limited Warranty
Warranty Terms and Claims Procedure
Details of the limited warranty, coverage, and how to make a claim.
Need help?
Do you have a question about the SDF-CT and is the answer not in the manual?
Questions and answers