Table of Contents
Advertisement
7. Inserting the battery
1
Faceplate
2
Battery compartment
3
Ribbon pull to aid
removal of battery
Positive pole
Negative pole
1. Unpack the battery.
2. Open the battery compartment:
Using your thumb, push the faceplate
down as far as it will go and remove it.
3. Insert the battery:
The ribbon pull must lie under the battery.
●
Insert the face of the battery with the connections
into the left side of the battery compartment.
●
Then carefully press the battery down on
the right side until it snaps into place.
Make sure that the positive and negative poles
are inserted the right way round.
4. Close the battery compartment:
Replace the faceplate and push it up with
your thumb until it snaps into place.
37
Hide quick links:
Advertisement
Table of Contents
