How To Carry Out Treatment - IBP DIGITAL TENS Instructions For Use Manual

42
► Self-adhesive electrodes for EMS treatment are positioned at
the origin and point of attachment of a muscle.
Please refer to the examples of use in sections 20 and 21 of this
instruction manual.

9.4 How to carry out treatment

During treatment you should keep a minimum of 1 m away from microwave
and short wave appliances. Electromagnetic interaction may affect the
functioning of the Digital TENS.
1. Use scissors to cut off any lush growth of hair at the points where you want
to apply the self-adhesive electrodes as recommended by your doctor or
therapist.
Do not shave the areas concerned.
2. Use a mild soap solution to clean the skin at the points where you want to
apply the self-adhesive electrodes. Rinse off the soap solution well and
dab the skin with a towel until it is thoroughly dry.
3. Connect the two-way adaptor of the self-adhesive electrodes with the
two-way adaptor at the end of the supply cable.
According to what your doctor or therapist recommends, you may also
carry out treatment using just one pair of electrodes. In this case make
the connections for this one pair of electrodes only.