Timer Stop; Fly Back Function - BREIL 6U50 Instruction Book

4) Timer stop

The timer stop confirmation signal sounds for 10 seconds at the end of the timing
session. At the end of the confirmation signal, the timer hands rapidly advance to the
timer default settings.
Once set, the timer settings will not change until they are manually reset, even if a
different mode is used.

Fly back function

The fly back feature is used to reset the timer at anytime after the timer has been
started.
12
l
+3 ( ).
l
+2 +1
55 10
45 15
35 25
l
6
IMPORTANT
Changing modes when Timer I is active will cancel the timing session. The timer settings
remain unchanged.
14
If button is pressed anytime during a timing operation,
a confirmation beep will sound and the timer will restart
from the initial settings. The timer restarts the moment
button is pressed. The watch automatically adjusts for
the time it takes for the timer hands to return to the start
of the timing operation.
Timer reset
B
Press button
reset the timer.
when the timer is in the stop position to