Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for BOGBALLE M3W
Summarization of Contents
Maintenance and Care
Normal Maintenance
Details on routine upkeep, cleaning, and lubrication for the machine.
Special Maintenance
Focuses on the maintenance and checks required for the friction clutch.
Lubrication
Components that must be greased according to instructions.
Parts Greased Once
Identifies components that require only a single greasing application.
General Maintenance Notes
Provides general advice on lubrication and bolt tightening.
Spreading Vanes Maintenance
Discusses the maintenance and replacement of spreading vanes.
Safety and Protection
Safety Precautions
Essential safety rules and warnings for operating the machine.
Setting System
Setting Pointer and Calibrator Adjustment
Details on adjusting the setting pointer and calibrator for accurate settings.
Adjustment Shutters
Explains the adjustment and importance of the machine's adjustment shutters.
Machine Settings
General Guidance for Machine Settings
Overview of key settings like PTO speed, tilt angle, and quantity.
PTO-Speed Setting
Instructions for setting the correct PTO speed for normal and headland spreading.
Tilt Angle Adjustment
Guidance on setting the tilt angle for optimal spread patterns.
Working Height - Standard
Specifies the standard working height measurement for the machine.
Working Height - Late Application
Adjusting working height for late application in high crops.
Working Height - Chassis Kit
Refers to the manual for chassis kit specific working height settings.
Quantity Setting and Spread Charts
How to set the quantity using the scale pointer and spread charts.
Vane Mounting and Position
Instructions for mounting vanes and selecting their positions.
Vane Type Selection
Choosing the correct vane type based on spread width and fertiliser.
Function of Spreading Vane
Normal Spreading Function
Describes how the vane functions during normal spreading.
Headland Spreading Function
Explains the vane's role in headland spreading.
Spreading Pattern Explanation
Normal Spreading Pattern
Details the spread pattern for normal field application.
Headland Spreading Pattern
Details the spread pattern for headland application.
Spreading Systems
Headland Spreading To Border
Spreading strategy for headlands with the border on the right.
Headland Spreading From Border
Spreading strategy for headlands with the border on the left.
Test Result Interpretation and Checks
Interpreting Test Tray Results
Understanding how test tray contents indicate distribution quality.
Pre-Test and Post-Test Checks
Checks to perform before and after conducting a test for accuracy.
Normal Spread Pattern Variations
Too Small Tilt Angle Effect
Impact of an insufficient tilt angle on the spread pattern.
Too Large Tilt Angle Effect
Impact of an excessive tilt angle on the spread pattern.
Headland Spreading To Border
Headland Spreading Settings
Adjustments for headland spreading, including rotation and PTO speed.
Headland Spread Width Categories
Minimum Headland Spread Width
Setting for minimum quantity spread over the border.
Medium Headland Spread Width
Setting for medium quantity spread over the border.
Maximum Headland Spread Width
Setting for maximum quantity spread over the border.
Headland Practical Test
Test Tray Placement and Purpose
How to place test trays and the purpose of headland tests.
Measuring and Calculating Headland Spread
Method for measuring and calculating headland spreading results.
Headland Spread Patterns To Border
Minimum Headland Pattern
Example of minimum headland spread pattern and its results.
Medium Headland Pattern
Example of medium headland spread pattern and its results.
Maximum Headland Pattern
Example of maximum headland spread pattern and its results.
Headland Spreading From Border
Headland Spreading Adjustments
Details on changing rotation direction and PTO speed for headland spreading.
Reduced Spread Width
Reduced PTO Speed for Width
How reducing PTO speed affects spread width and quantity.
Reduced Tilt Angle for Width
Using tilt angle adjustment to reduce spread width.
Quadro Calibration System Usage
Calibration Procedure
Step-by-step guide for using the quadro calibration system.
Need help?
Do you have a question about the M3W and is the answer not in the manual?
Questions and answers