Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for BOGBALLE M3
Summarization of Contents
Technical Specifications
General Specifications
Lists general technical data and features of the M2(W)/M3(W)/M6W machines.
Specific Specifications
Details specific technical data in a tabular format for various models.
Maintenance and Care
Normal Maintenance
Outlines daily cleaning and general maintenance procedures for the machine.
Special Maintenance: Friction Clutch
Explains the critical role and maintenance requirements of the friction clutch.
Lubrication
Daily Lubrication
Details components requiring daily lubrication according to a schedule.
Parts Greased Once
Identifies components that are pre-greased and require no additional lubrication.
General Maintenance Notes
Covers general checks like bolt tightening and care for spreading vanes.
Setting System
Setting Pointer, Hydraulic / CALIBRATOR
Describes how to adjust the setting pointer for accurate output.
Adjustment Shutters
Details the adjustment of outlet shutters for symmetrical spreading.
Function
User Friendliness
Highlights the machine's ease of use and flexible operation.
Reliability
Details the machine's robust construction and long-term durability.
Machine Settings
General Guidance for Machine Settings
Lists essential settings like PTO speed, tilt angle, and working height.
Tilt Angle
Explains the importance of tilt angle for spread pattern and overlap.
Working Height - Standard
Specifies the standard measurement for working height.
Working Height - Late Application
Details how to adjust working height for late application in high crops.
Working Height - Chassis Kit
Refers to a separate manual for chassis kit related working height.
Quantity Setting
Describes how to set the fertiliser quantity using scales and charts.
Vane / Spread Width Setting
Explains vane mounting and selection for optimal spread width.
Function of Spreading Vane
Normal Spreading
Describes the use of the front side of the vane for normal spreading.
Headland Spreading
Explains the use of the back side of the vane for headland spreading.
Spreading Systems
Normal and Headland Spreading
Illustrates normal and headland spreading, including disc rotation and overlap.
Headland Spreading: To Border
Details headland spreading with distance from border to first tramline.
Headland Spreading: From Border
Details headland spreading with first tramline close to the border.
Practical Test
Test with Test Trays
Provides instructions for using test trays to measure spread patterns accurately.
Interpreting Test Results
Explains how to analyze test tray data for spread quality assessment.
Checks for Good Order
Lists essential checks to ensure accurate test execution and machine setup.
Examples of Normal Spread Patterns
Tilt Angle Too Small
Illustrates spread patterns resulting from an insufficient tilt angle.
Tilt Angle Too Large
Illustrates spread patterns resulting from an excessive tilt angle.
Headland Spreading: To Border
Headland Spreading Categories
Details categories for headland spread width based on PTO speed.
Practical Test for Headland Spreading
Examples of Headland Spread Patterns: To Border
Shows graphical examples of minimum, medium, and maximum headland patterns.
Headland Spreading: From Border
From Border Details
Explains PTO speed adjustments for headland spreading from the border.
Reduced Spread Width
Discusses methods to reduce spread width via PTO speed or tilt angle.
Reduced PTO Speed
Details quantity reduction when PTO speed is lowered for spread width.
Reduced Tilt Angle
Explains how reducing tilt angle affects spread width and quantity.
Checks Before Use
Tractor Checks
Details essential tractor settings and checks before attaching the spreader.
Spreader Checks
Outlines checks for spreader components, PTO shaft, and outlets.
Quadro Calibration System
Calibration Steps
Illustrates the step-by-step process for calibrating the spreader.
Flow Factor Calculation
Provides formulas and tables for calculating the flow factor.
Need help?
Do you have a question about the M3 and is the answer not in the manual?
Questions and answers