Bernina BERNETTE 90e Manual
Hide thumbs Also See for BERNETTE 90e:

Advertisement

When using an electrical appliance, basic safety precautions
should always be followed, including the following:
Read all instructions before using this sewing machine.
DANGER
- To reduce the risk of electric shock:
1. An appliance should never be left unattended when
plugged in.
2. Always unplug this appliance from the electric outlet
immediately after using and before cleaning.
3. Always unplug before re-lamping. Replace bulb with same
type rated 5 watts/ 12V
WARNING
- To reduce the risk of burns, fire,
electric shock, or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary
when this appliance is used by or near children and infirm
persons.
2. Use this appliance only for its intended use as described in this
manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to the
nearest authorized dealer or service center for examination,
repair, electrical or mechanical adjustment.
EN
SERVICING
DOUBLEINSULATED
PRODUCTS
In a double-insulated product, two systems of insulation are
provided instead of grounding. No grounding means is provided
on a double-insulated product nor should a means for grounding
be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system and should
only be done by qualified service personnel. Replacement parts for
a double-insulated product must be identical to those parts in the
product. A double insulated product is marked with the words
"DOUBLE INSULATION" or "DOUBLE INSULATED".
The symbol
may also be marked on the product.
IMPORTANT SAFETY INSTRUCTIONS
4. Never operate the appliance with any air openings blocked.
5. Keep fingers away from all moving parts. Special care is
6. Always use the proper needle plate. The wrong plate can
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the
9. Switch the sewing machine off ("O") when making any
10. Always unplug sewing machine from the electrical outlet when
11. Never drop or insert any object into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol spray products are being used
14. To disconnect, turn all controls to the off ("O") position, then
15. Do not unplug by pulling on cord. To unplug, grasp the plug,
16. This machine is provided with double insulation. Use only
SAVE THESE
INSTRUCTIONS
This sewing machine is intended for household use only.
Keep ventilation openings of the sewing machine and foot
controller free from accumulation of lint, dust, and loose
cloth.
required around the sewing machine needle.
cause the needle to break.
needle causing it to break.
adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser foot,
and the like.
removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.
or where oxygen is being administered.
remove plug from outlet.
not the cord.
identical replacement parts. See instructions for Servicing of
double-insulated machines.
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BERNETTE 90e and is the answer not in the manual?

Questions and answers

Summarization of Contents

Important Safety Instructions
DANGER
Instructions to reduce the risk of electric shock when using the appliance.
WARNING
Instructions to reduce the risk of burns, fire, electric shock, or injury.
Accessories
Standard Accessories
List of common accessories included with the sewing machine.
Optional Accessories
List of additional accessories available for purchase.
Attaching the Presser Foot Holder
Attaching the Presser Foot
Steps to attach the presser foot to the holder.
Removing the Presser Foot
Steps to remove the presser foot from the holder.
Attaching the Seam Guide
Instructions for attaching the seam guide.
Thread Tension
Upper Thread Tension
Guidance on adjusting the upper thread tension for optimal stitching.
Starting to Sew
Reverse Sewing
Instructions on how to perform reverse sewing stitches.
Removing the Work
Procedure for removing the sewn fabric from the machine.
Cutting the Thread
How to use the thread cutter on the machine.
Adjust Pattern Balance
Adjusting Distorted Stretch Stitch Patterns
Correcting unevenness in stretch stitch patterns.
Adjusting the Stitch Density of Buttonhole
Fine-tuning stitch density for buttonholes.
General Instructions of LCD
Buttonhole - Standard Setting
LCD display information for standard buttonhole settings.
Practical Stitches - Standard Setting
LCD display information for standard practical stitches.
Practical Stitches - "S" Setting
LCD display information for practical stitches with 'S' setting.
Zigzag Stitching
Function of Stitch Width Dial
Adjusting the stitch width for zigzag sewing.
Function of Stitch Length Dial while Zigzaging
Adjusting stitch length for zigzag sewing density.
Satin Stitch
Using short stitch length for satin stitch effect.
How to Sew Buttonholes
Prepare
Steps and preparations required before sewing buttonholes.
Stitch Selection
Triple Straight Stitch
Instructions for sewing the triple straight stitch.
Triple Zig-Zag
Instructions for sewing the triple zig-zag stitch.
Practical Stitches
Shell Hem
How to sew a decorative shell hem.
Rampart
Using the rampart stitch for seams and joining.
Bridging
Sewing seams or creating fagotted effects with bridging stitch.
Scallop Stitch
Creating delicate edge finishes using scallop stitch.
Decorative Stitches
Square Stitch
Instructions for sewing a square stitch pattern.
Decor Stitch
How to sew decorative stitches for embellishment.

Table of Contents

Save PDF