McAfee VIRUSSCAN 5.1 Getting Started Manual page 21

Š NOTE: The VirusScan Setup utility does not support the other
options shown in this menu. You may not install VirusScan
components to run from a network, and VirusScan software
has no components that you can install on an as-needed basis.
You can also specify a different disk and destination directory for the
installation. Click Change, then locate the drive or directory you want to
use in the dialog box that appears. To see a summary of VirusScan disk
usage requirements relative to your available hard disk space, click Disk
Usage. The wizard will highlight disks that have insufficient space.
12. When you have chosen the components you want to install, click Next>
to continue.
Setup will show you the Ready to Install wizard panel that confirms its
readiness to begin installing files.
13. Click Install to begin copying files to your hard drive. Otherwise, click
<Back to change any of the Setup options you chose.
Setup first removes any previous VirusScan versions or incompatible
software from your system, then copies VirusScan program files to your
hard disk. When it has finished, it displays the Completing Setup panel
that asks if you want to configure the product you installed.
Figure 2-7. Ready to Install panel
Installing VirusScan Software
Getting Started Guide 21