Setting The Delay Time - Denon AVR-2105 Operating Instructions Manual

ENGLISH

Setting the delay time

• Input the distance between the listening position and the different speakers to set the delay time for the surround mode.
Preparations:
Measure the distances between the listening position and the speakers (L1 to L5) on the diagram at the
right).
L1: Distance between center speaker and listening position
L2: Distance between front speakers and listening position
L3: Distance between surround speakers and listening position
L4: Distance between surround back speaker and listening position
L5: Distance between subwoofer and listening position
CAUTION:
Please note that the difference for every speaker should be 15 ft or less.
NOTES:
• No setting when "None" has been selected for the Speaker Configuration setting.
• Surround back is not displayed when ZONE 2 is set with the POWER AMP ASSIGN setting.
1
2
3
26
Select the speaker to be set.
8 FRONT L
Set the distance between the speaker and listening position.
The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to enter the setting and switch the SUBWOOFER MODE setting.
FL
Subwoofer
SL
12ft
Center FR
L
L
1
2
L Listening position
5
L
L
3
SR
4
SBL SBR