Related Manuals for MITECH mt190
Summarization of Contents
Overview
Product Specifications
Key technical details and capabilities of the ultrasonic thickness gauge.
Main Functions
Overview of the primary features and modes available on the device.
Measuring Principle
Explanation of how the gauge uses ultrasonic waves to determine thickness.
Configuration
Details on the physical setup and components of the instrument.
Operating Conditions
Environmental and usage parameters for the device.
Structure Feature
Main Screen
Description of the display layout and information shown during operation.
Keypad Definitions
Explanation of the function of each button on the instrument's keypad.
Preparation
Transducer Selection
Guidance on choosing the appropriate transducer for different materials and tasks.
Condition and Preparation of Surfaces
Instructions for ensuring surfaces are ready for accurate ultrasonic measurements.
Operation
Power On/Off
Procedure for turning the ultrasonic thickness gauge on and off.
Setting the Measurement Mode
How to select between Pulse-Echo and Echo-Echo modes.
Perform Probe Zero
Steps to calibrate the transducer for accurate readings.
Sound Velocity Calibration
Process for setting the correct sound velocity for material measurement.
Calibration to a known thickness
Method for calibrating using a sample of known thickness.
Calibration to a known velocity
Method for calibrating using a known material sound velocity.
Two Point Calibration
Advanced calibration technique using two known thickness points.
Making Measurements
Detailed steps for performing thickness measurements.
Scan mode
How to use the scan feature for finding the thinnest point.
Changing Resolution
Adjusting the display precision (0.1mm vs 0.01mm).
Changing Units
Switching measurement units between metric and imperial.
Memory Management
Procedures for storing, clearing, and managing measurement data.
Storing a reading
How to save a measured value to memory.
Clearing selected file
Process to erase all stored measurements in a specific file.
Viewing/deleting stored record
How to review and remove individual saved measurements.
EL Backlight
Instructions for enabling and disabling the display's backlight.
Battery Information
How to check the remaining battery level and status.
Auto Power Off
Explanation of the feature that conserves battery by turning off the device.
System Reset
Procedure to restore the gauge to its factory default settings.
Connecting to a Computer
Steps for linking the gauge to a PC for data transfer.
User Notes
Warranty
Details about the product's guarantee period and terms.
Service promise
Information regarding MITECH's after-sales support and maintenance.
Need help?
Do you have a question about the mt190 and is the answer not in the manual?
Questions and answers