Table of Contents
Advertisement
User's Manual
MaxiiPower
High Powered PoE Midspans UTP
MaxiiPower
High Powered Midspans UTP Extenders
MaxiiPower
High Powered Midspans Ethernet to Coax Extender
Version 1.2 Updated 10/07/2015
2013 Vigitron, Inc. All rights reserved. All brand and product names are trademarks or registered trademarks
of their respective companies.
TM
Vi2208A & Vi2216A
TM
Vi2508 & Vi2516
TM
Vi2608 & Vi2616
Advertisement
Table of Contents
Related Manuals for Vigitron MaxiiPower Vi2216A
Summarization of Contents
System Requirements
1.1 Overview
Provides an overview of the MaxiiPower™ Midspans and their capabilities.
1.2 Drawings
Illustrates the physical layout and connections of the Midspan units.
Hardware Specifications
1.3 Electrical
Details electrical specifications including Ethernet interface, output power, and AC input.
1.5 Mechanical
Provides mechanical details such as dimensions, weight, and material.
1.8 Hardware Setup
Step-by-step instructions for physically installing the Midspan hardware.
1.9 LED Diagnostics
Explains the meaning of the status LEDs on the Midspan ports.
GUI Installation Procedure
Connecting Through an Ethernet Cable
Steps for connecting the Midspan to a computer using an Ethernet cable.
System Configuration and Management
Midspan Default Network
Details the default network settings for the Midspan unit.
Username and Password
Information on setting and managing user login credentials for the GUI.
Firmware Window
Describes the interface for managing and updating the Midspan firmware.
System Configuration
1.11.1 Power Management
Configuration options for managing power distribution and requirements for connected devices.
1.11.2 ILIM/ICUT Configuration
Settings for Current Limit and Current Cut Limit for power management.
1.12.4 Delayed Power up
Configures port delay times to prevent simultaneous power-on after a failure.
Multiple Port Configuration Window
1.13.1 Detection Type
Selects the PD detection type for ports to ensure compatibility with connected devices.
1.13.2 Classification
Sets the classification type for ports, affecting how power is managed.
1.13.3 Violation Type
Defines how port violations are handled during power delivery.
1.13.5 Power Inrush Control
Manages the inrush current for ports, especially for legacy devices.
System View Window
1.14.1 Poll
Enables continuous refreshing of port parameters for real-time monitoring.
1.14.2 Power Available
Displays the total available power capacity of the Midspan.
1.14.6 Port Status
Shows the current status of each port, color-coded for clarity.
1.14.7 Port Power
Displays the power currently being delivered by each port.
Port Configuration Window
1.15.1 Port
Allows selection of a specific port number to view or configure.
1.15.2 Detection Type
Selects the PD detection type for ports to ensure compatibility with connected devices.
1.15.3 Classification
Sets the classification type for ports, affecting how power is managed.
1.15.5 Port Priority
Assigns priority levels to ports when total power demand exceeds availability.
Port Status Details
1.16.1 Status
Shows the current status of each port, color-coded for clarity.
1.16.2 Class/Error Value
Displays detected class or error values for port operation.
1.16.3 Remote PD Type
Identifies the type of powered device connected to the port.
1.16.4 Voltage
Shows the output voltage of the port.
Statistics
1.17.1 Overload Counter
Counts the number of times a port has been in an overload status.
1.17.2 Short Counter
Counts the number of times a port has been shorted.
1.17.3 Power Denied Counter
Counts instances where power was denied to loads due to availability or priority.
1.17.5 Reset Statistics
Resets all port statistics counters to zero.
IP Address Configuration
1.18.1 Host IP Address
Used to determine the Host computer IP address for connection.
1.18.3 Midspan IP Address
Lists IP addresses of Midspans connected to the network.
1.18.4 Find All Midspan IP Addresses
Scans the network to find all connected Midspan IP addresses.
1.18.6 Program New Midspan IP Address
Reprograms the IP address, default gateway, and subnet mask of a Midspan.
SNMP Management
1.19.1 SNMP Message Reception
Explains how to receive SNMP messages using trap programs.
1.19.2 SNMP Monitoring List
Details adding Midspans to the SNMP monitoring list.
1.19.3 SNMP Enabled Ports
Configures which ports on the Midspan will have SNMP enabled.
1.19.4 SNMP Configuration Management
Manages saving, loading, and miscellaneous controls for SNMP configuration.
Appendix A: Legal Terms and Conditions
Software Acceptance Terms
Covers acknowledgement, license grant, warranty disclaimer, and liability limits.
Arbitration and Governing Law
Details arbitration procedures and the governing law of the agreement.
Miscellaneous Agreement Provisions
Outlines other terms such as governing language, waivers, and assignment.
Need help?
Do you have a question about the MaxiiPower Vi2216A and is the answer not in the manual?
Questions and answers