Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Mitsubishi FX1N-60MR-DS 36
Summarization of Contents
Note’s on the symbols used in this manual
Hardware warnings
Explains symbols for physical and property damage warnings.
Software warning
Explains symbols for software usage care and points of interest.
Note Concerning the CE Marking
EMC
Details products compliant with European Electromagnetic Compatibility directive.
1. Introduction
1.1 World Specification
Details input/output specifications and models.
1.2 Model Name
Explains how to interpret the model naming convention.
1.3 Serial Numbers
Describes the format and meaning of serial numbers.
1.4 Configuration
Explains system configuration options and expansion.
1.5 Back up Data
Covers EEPROM and capacitor backup methods.
2. Terminal layouts
2.1 AC Powered Main Units
Shows terminal layouts for AC powered main units.
2.2 DC Powered Main Units
Shows terminal layouts for DC powered main units.
2.3 FX0N, FX2N-8E Extension blocks
Details terminal layouts for FX0N/FX2N-8E extension blocks.
2.4 FX2N Extension blocks
Details terminal layouts for FX2N extension blocks.
3. Installation Notes
3.1 Product Outline
Provides an overview of the FX1N PLC features and components.
3.2 FX1N RUN/STOP Control
Explains how to control the PLC's RUN/STOP status.
3.3 General Specifications
Lists general operating and physical specifications.
3.4 PLC Mounting Arrangements
Details recommended mounting configurations for optimal temperature.
3.5 DIN Rail Mounting
Describes the procedure for mounting the unit on a DIN rail.
3.6 Direct Mounting
Explains how to mount the unit directly using screws.
3.7 Termination at Screw Terminals
Guides on proper termination at screw terminals, including wire sizes.
3.8 Installing Optional Units
Instructions for installing expansion boards and modules.
4. Power Supply
4.1 Wiring Techniques
General guidance on safe and easy wiring for FX1N products.
4.2 Wiring Cautions
Important precautions for signal and power cable routing.
4.3 Power Supply
Details correct wiring for AC and DC power supplies.
4.4 Power Requirements
Specifies power supply voltage, current, and fuse ratings.
4.5 Example Wiring
Provides wiring examples for AC and DC power supplies.
4.6 Service Power supply
Describes the service current capability.
4.7 Earthing / Grounding
Guidelines for proper grounding and resistance.
5. Inputs
5.1 24V DC input Specifications
Details specifications for 24V DC inputs.
5.2 AC110V Input Extension Block
Provides specifications for AC110V input extension blocks.
6. Outputs
6.1 Output Specifications
Lists specifications for relay and transistor outputs.
6.2 Relay Output Example
Shows typical wiring examples for relay outputs.
6.3 Transistor Output Example
Provides examples of transistor output wiring (Source/Sink types).
6.4 Applying Safe Loads
Guides on safely connecting loads to outputs.
7. Diagnostics
7.1 Preliminary Checks
Outlines initial checks before operating the PLC.
7.2 ERROR LED ON (CPU ERROR)
Diagnoses issues when the ERROR LED is on.
7.3 Common Errors
Lists typical errors encountered with the PLC.
7.4 Maintenance
Provides guidelines for routine maintenance.
7.5 Operation and Error Flags
Explains status flags and their meanings.
7.6 PLC Status Registers
Describes registers used to check PLC status.
7.7 Error Registers
Lists registers for detailed error information.
7.8 Error Codes
Provides a list of specific error codes.
7.9 Instruction List
Lists available PLC programming instructions.
7.10 Device List
Details the PLC's internal memory devices and their specifications.
Need help?
Do you have a question about the FX1N-60MR-DS 36 and is the answer not in the manual?
Questions and answers