Chapter 1: Installing And Removing Options - Lexmark 10Z0100 User Manual

1
Installing and removing options
You can customize your printer memory capacity and connectivity by adding optional cards and input devices. You can also
use these instructions to help you locate an option for removal. Install the printer and any options you have purchased in the
following order:
CAUTION: If you are installing options after setting up the printer, turn the printer off and unplug the power cord
before continuing.
• High capacity feeder (2000-sheet drawer)
• Optional drawers
• Duplex unit
• Printer
• Output options
The instructions in this section cover the following options:
Input options
High capacity feeder (2000-sheet drawer)
Optional drawers
Duplex unit
Note: Use a Phillips screwdriver to remove the system board access cover.
• Other internal options
– Printer hard disk
– RS-232 serial interface card
– Parallel 1284-B interface card
– Internal print servers (also called internal network adapters or INAs)
Note: Some options may not be available on some models.
Output options
Output expander
5-bin mailbox
StapleSmart™ finisher
Installing and removing options
5
Internal options
Memory cards
– Printer memory
– Flash memory
– Fonts
Firmware cards
– Bar Code
– IPDS and SCS/TNe
– PrintCryption™