Table of Contents

Advertisement

Register at www.Toro.com.
Original Instructions (EN)
Groundsmaster
Mower
Model No. 30360—Serial No. 314000001 and Up
Model No. 30363—Serial No. 314000001 and Up
Model No. 30363TC—Serial No. 314000001 and Up
Model No. 30363TE—Serial No. 314000001 and Up
Model No. 30461—Serial No. 314000001 and Up
Model No. 30462—Serial No. 314000001 and Up
Model No. 30464—Serial No. 314000001 and Up
Model No. 30464TC—Serial No. 314000001 and Up
Model No. 30465—Serial No. 314000001 and Up
Model No. 30467—Serial No. 314000001 and Up
Model No. 30468—Serial No. 314000001 and Up
Form No. 3383-130 Rev A
®
7200 and 7210
*3383-130* A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 30467 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Guidelines and Precautions
Safe Operating Practices
Guidelines for safe operation, adapted from industry standards.
Safe Handling of Fuels
Precautions for safe handling of gasoline and diesel fuel.
Rollover Protection System (ROPS) Use
Instructions for the use, maintenance, and safety of the Rollover Protection System.
Slope Operation Safety
Safety instructions and warnings specific to operating the mower on slopes.
Machine Specifications and Measurement Levels
Sound and Vibration Level Data
Details on sound power, sound pressure, and vibration levels for operator safety.
Slope Indicator Guide
Chart and instructions for determining safe operating slopes based on machine angle.
Setup and Initial Preparation
Loose Parts Checklist and ROPS Adjustment
Check shipped parts and procedure for adjusting the Roll Over Protection System.
Tire Pressure and Weight Installation
Instructions for checking tire pressure and installing weights for CE compliance.
Fluid Level Checks and Manual Review
Procedures for checking fluid levels and reviewing operator manuals.
Product Overview and Controls
Machine Components and Control Layout
Diagrams identifying key machine components and the control panel layout.
Ignition, Throttle, and PTO Controls
Explanation of the functions of the ignition switch, throttle lever, and PTO switch.
Warning Lights and Gauges
Description of warning lights for engine conditions and the fuel gauge.
Operating Procedures
Fueling and Engine Start/Stop Procedures
Procedures for safely fueling the machine, starting, and stopping the engine.
Driving and Mowing Operations
Instructions for driving, turning, operating the mower deck, and safety during mowing.
PTO Engagement and Height Adjustment
Steps for engaging the PTO and adjusting the mower deck's cutting height.
Adjustments and Settings
Adjusting Mower Deck Skids and Rollers
Procedures for adjusting mower deck skids and rear anti-scalp rollers.
Control Lever and Traction Drive Adjustments
Adjustments for control levers, neutral return, and traction drive for correct operation.
Maximum Ground Speed and Tracking Adjustment
Steps for setting maximum ground speed and adjusting the machine's tracking.
Maintenance Schedule and Procedures
Daily Maintenance Checklist
Daily checks to ensure the machine's safety and operational readiness.
Engine and Fuel System Maintenance
Maintenance for air cleaner, engine oil, fuel system, and water separator.
Electrical, Drive, and Cooling System Maintenance
Maintenance for electrical system, battery, fuses, drive system, and cooling system.
Brake, Belt, and Hydraulic System Maintenance
Adjusting parking brake interlock, checking belts, and servicing the hydraulic system.
Mower Deck Maintenance
Inspection, sharpening, and replacement of mower blades, and deck adjustments.
Storage and Transportation
Loading, Transporting, and Storing the Machine
Guidelines for safely loading, transporting, and preparing the machine for storage.
Toro Total Coverage Guarantee
Owner Responsibilities and Warranty Coverage
Owner responsibilities and details on what is covered under the Toro warranty.
Warranty Exclusions and Conditions
Details on warranty exclusions, including normal wear and external factors.

Table of Contents