Denon AVR-485S Operating Instructions Manual page 42

ENGLISH
DTS NEO:6 mode
1
Select the function to which the component you want to play
is connected.
Example: DVD
(Main unit)
2
Select the DTS NEO:6 mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
3
Play a program source.
4
Select the surround parameter mode.
(Main unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO".
5
Select the optimum mode for the source.
(Main unit)
MODE
42
(Remote control unit)
(Remote control unit)
DOLBY PL II x cinema
DTS NEO:6
Display
MODE cinema
(Remote control unit)
(Remote control unit)
cinema MODE music
or or
1 2
2
1
8
5, 7
6
Set the surround parameters according to the mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
MODE CINEMA
CINEMA EQ
TONE DEFEAT
SURROUND BACK
DEFAULT
If you do want the bass and trable to be adjusted, turn off
the tone defeat mode.
4, 6 5, 7
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the CINEMA
or MUSIC button on the remote
control unit during playback in
the DTS NEO:6 mode.
4, 6
5, 7
(Remote control unit)
MODE MUSIC
CENTER IMAGE
TONE DEFEAT
SURROUND BACK
DEFAULT