Connecting The Monitor; Connecting The Playback Components; Dvd Player - Denon AVR-2308CI Owner's Manual

Connecting the Monitor

• Connect the cables to be used (vpage 8 "Video Conversion Function").
• With HDMI connections, the video and audio signals can be transferred with a single cable.
• To output the audio signals to the monitor with HDMI connections, set menu "Manual Setup" – "HDMI
Setup" – "HDMI Audio Setup" to "TV" (vpage 27).
Monitor
NOTE
• The component video connectors may be indicated differently on your monitor. For details, see the
monitor's operating instructions.
• No audio signals are output from the HDMI monitor output connector. To play the sound by monitor, make
analog or digital audio output connections to monitor's audio input connectors.
• The audio signals output from the HDMI connectors are only the HDMI input signals.
Video-converted HDMI signals are not included in the audio signals.

Connecting the Playback Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.

DVD Player

• Connect the cables to be used.
• With HDMI connections, the video and audio signals can be transferred with a single cable.
DVD player
• Connect an HDP (High-Definition Player) in the same way.
• When using an optical cable for the digital audio connection, make the settings at menu "Input Setup"
– "Assign" – "Digital In" (vpage 35).
ENGLISH
L R
L R