Multi-Zone Operations; Turning The Power On And Off; Selecting The Input Source; Adjusting The Volume - Denon AVR-1908 Owner's Manual

ENGLISH
SOURCE SELECT
<ZONE2 ON/OFF>
<ZONE2/REC SELECT>
[Front]
SOURCE
SELECT
VOLUME
[MUTING]
[MODE
SELECTOR 2]
[MODE
SELECTOR 1]
(Main remote control unit)
[ZONE2 OFF]
SOURCE SELECT
(Sub remote control unit)
About the button names in these explanations
< > : Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Multi-zone Operations

VOLUME

Turning the Power On and Off

GOperation on the main unitH
Press <ZONE2 ON/OFF>.
When the power turns on, the multi-zone indicator (
the display.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
"ZONE2" (main remote control unit).
w Press [ZONE2 ON] or [ZONE2 OFF].
[Rear]
When using ZONE2, it is possible to turn the power for the MAIN
[ZONE2 OFF]
ZONE only on or off by pressing [MAIN ON] or [MAIN OFF].
[ZONE2 ON]
[MAIN OFF]

Selecting the Input Source

[MAIN ON]
SOURCE
GOperation on the main unitH
SELECT q Press <ZONE2/REC SELECT> and select the zone to be adjusted.
w Turn <SOURCE SELECT>.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
"ZONE2" (main remote control unit).
w Press [SOURCE SELECT].
[ZONE2 ON]
VOLUME
[MUTING]

Adjusting the Volume

GOperation on the main unitH
q Press <ZONE2/REC SELECT> and select the zone to be adjusted.
w Turn <VOLUME> to adjust.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
) lights on
"ZONE2" (main remote control unit).
w Press [VOLUME].
[Variable range] – – – –70dB ~ –40dB ~ +18dB
• The volume can be increased up to the value set at menu "Manual
Setup" – "Zone2 Setup" – "Volume Limit" (vpage 28).
• The ZONE2 volume can be adjusted only when "ZONE2" is selected
at menu "Manual Setup" – "Option Setup" – "Amp Assign" (vpage
28).

Turning off the Sound Temporarily

q Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
"ZONE2" (main remote control unit).
w Press [MUTING].
The sound is reduced to the level set at menu "Manual Setup" –
"Zone2 Setup" – "Mute Level" (vpage 28).
To cancel, either adjust the volume or press [MUTING] again.
The setting is canceled when the zone's power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL, OPTICAL or HDMI
connectors cannot be played in multi-zone.