Surround - Denon AVR-2801 Operating Instructions Manual

ENGLISH

10 SURROUND

Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment
can be performed with the system setup (see page 19) or from the remote control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the DOLBY SURROUND
modes. The adjusted levels for the different modes are automatically stored in the memory.
1 Press the T. TONE button.
2 Test tones are output from the different speakers. Use the
channel volume adjust buttons to adjust so that the volume of
the test tones is the same for all the speakers.
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.
1 Select the speaker whose level you want to adjust.
CH.VOL
(Main unit)
The channel switches as shown below each time the button
is pressed.
FL
1 1
2 Adjust the level of the selected speaker.
SELECT
(Main unit)
Only adjustable when the
channel is selected with the
CH.VOL buttons on the main
unit.
NOTES:
• The adjustment range for the different channels is +12 dB to
–12 dB.
• When using the DIRECT mode, the sound from the subwoofer
can be cut by lowering the SW (subwoofer) setting one step
from –12 dB (setting it to "OFF").
36
T.TONE
(Remote control unit)
(Remote control unit)
CH SELECT
ENTER
(Remote control unit)
C FR SR SL
1 1 1
FADER SW
1 1
(Remote control unit)
TUNING
BAND
MODE
MEMORY
1,3
USE/LEARN T.TONE
3 After completing the adjustment, press the T. TONE button
again.
(Remote control unit)
START
SYSTEM CALL
SET CALL
DVD VDP
1 2
TV/DBS
4 5
VCR-1 CD
7 8
VCR-2/V.AUX
+10 0
VOLUME
DOLBY / DTS
SPEAKER SURROUND
DSP SIMULATION 5CH STEREO
INPUT MODE ANALOG
AUDIO
AVR/AVC VIDEO
TUNING
BAND
MODE
1
MEMORY
USE/LEARN T.TONE
SYSTEM SURROUND
SETUP PARAMETER
TITLE MENU/GUIDE
CH SELECT
ENTER
2
SELECT
STATUS
ON SCREEN
DISPLAY RETURN
DVD
SET UP
T.TONE
RC-881
LEARNED/TX
POWER
OFF ON / SOURCE
TUNER SHIFT
3
PHONO
6
CDR / TAPE CHANNEL
9
TV/VCR
A / B
DISC SKIP+
DIRECT
STEREO
MASTER VOL.
EXT.IN
DECK CDR/MD
CD MUTING
DVD TV
VDP VCR
SYSTEM SURROUND
SETUP PARAMETER
TITLE MENU/GUIDE
CH SELECT
ENTER
2
SELECT
STATUS ON SCREEN
DISPLAY RETURN
DVD
SET UP