Related Manuals for Daikin FXZQ50M8V1B
Summarization of Contents
Before Installation
Refrigerant Information
Key details about the refrigerant used in the unit.
Installation Site Selection
Guidelines for choosing an appropriate location for the unit.
Installation Preparations
Steps and considerations before commencing unit installation.
Indoor Unit Installation Procedures
Detailed steps for mounting the indoor unit.
Refrigerant Piping Work
Instructions for connecting the refrigerant lines.
Drain Piping Work
Guidance on installing the drainage system for condensate.
Electric Wiring Work
Procedures for electrical connections to the unit.
Wiring Examples and Remote Controller Setup
Visual guides for wiring and setting up the remote controller.
Field Setting Procedures
Instructions for configuring unit settings based on installation.
Decoration Panel Installation
Steps for attaching the decorative panel.
Test Operation Procedure
How to conduct initial operational checks after installation.
Maintenance Guidelines
Basic instructions for unit upkeep.
Disposal Requirements
Information on the proper disposal of the unit.
Wiring Diagram Overview
Reference to the unit's wiring schematic.
Important Precautions
Installation Location Hazards
Warnings against installing the unit in specific hazardous environments.
Site Selection and Accessory Installation Warnings
Guidance on site selection and caution against improper accessory mounting.
Accessories and Options
Included Accessories Check
List of items included with the unit for verification.
Optional Remote Controllers
Information on available wired and wireless remote controllers.
Installation Checks and Care
Pre-Installation Check List
A list of critical checks to perform during and after installation.
Installer Guidance
Installer Responsibilities and Customer Education
Instructions for installers regarding customer education and documentation.
Installation Site Considerations
Environmental Conditions for Site Selection
Requirements for temperature, humidity, and fresh air intake.
Air Flow Direction Considerations
Guidance on selecting optimal air discharge directions.
Ceiling Strength and Opening Requirements
Importance of ceiling support and correct opening size.
Important Information Regarding Refrigerant
Refrigerant Type and GWP
Details on the refrigerant type (R410A) and its global warming potential.
Preparations Before Installation
Ceiling Opening and Suspension Bolt Positioning
Relationship between ceiling opening, unit size, and suspension bolts.
Ceiling Opening Size and Sealing Material
Guidelines for ceiling opening dimensions and use of sealing material.
Indoor Unit Installation Details
Ceiling Opening Creation and Piping/Wiring Routing
Creating the opening and routing pipes and wires.
Suspension Bolt Installation
Guidance on installing suspension bolts using appropriate anchors.
Unit Levelling Procedure
How to ensure the unit is installed horizontally using a water level.
Paper Pattern Removal
Instructions for removing the installation paper pattern.
Refrigerant Piping Work
Professional Installation Requirements
Emphasizes the need for licensed technicians and compliance with codes.
Heat Insulation for Piping
Importance of insulating gas and liquid pipes to prevent condensation and leakage.
Flare Nut Tightening Torque
Specifications for tightening flare nuts to prevent leaks and damage.
Indoor Unit Installation
Temporary Indoor Unit Mounting
How to temporarily attach the hanger bracket to the suspension bolt.
Positioning the Indoor Unit
Aligning the unit with the ceiling opening using the paper pattern.
Drain Piping Work
Drain Piping Installation Requirements
Proper rigging and sloping of drain pipes to prevent leaks and blockages.
Drain Hose Connection and Securing
How to connect the drain hose to the socket and secure it.
Condensation Prevention on Drain Pipes
Measures to insulate drain pipes and prevent dew condensation.
Piping Configuration Examples
Guidance on connecting multiple drain pipes and raising pipes.
Piping Procedures
Piping Connection Method
Steps for connecting piping components like hanger brackets and drain hoses.
Drain Piping Precautions
Drain Raising Pipe Installation Limits
Restrictions on the height and angle of drain raising pipes.
Drain Hose Slope and Hanging Bar Spacing
Recommendations for the drain hose slope and hanging bar placement.
Multiple Drain Pipe Connection
How to connect multiple drain pipes together.
Drainage and Wiring Checks
Drainage Flow Test Procedure
How to test drainage by adding water to the unit.
Checking Drainage During Cooling Operation
Verifying drain flow during cooling mode.
Electric Wiring Work Steps
Connecting Power Supply and Remote Controller
Wiring the power supply and remote controller to the unit terminals.
Test Operation
Initiating Test Operation Mode
How to start the test operation using the remote controller.
Electric Wiring Work
General Wiring Instructions
General guidelines for electrical wiring, including local codes and wire types.
Power Supply Wiring and Grounding
Proper connection of power supply and grounding.
Wiring Diagram Reference
Guidance on using the unit's wiring diagram.
Circuit Breaker Requirement
The need for a circuit breaker to shut down power.
Automatic Restart Behavior
How the unit behaves when the main power is turned on/off.
Wiring Examples and Controller Setup
Power Supply and Ground Wire Connection
Detailed steps for connecting power supply and ground wires.
Transmission Wiring and Remote Controller Connection
Connecting transmission wiring and the remote controller.
Sealing Material Application
How to use sealing material to prevent water infiltration.
Wiring Diagram Label Reference
Information on the wiring diagram label located on the switch box lid.
Wiring Precautions
Terminal Connection Precautions
Warnings about connecting wires of different gauges to terminals.
Wire Gauge and Cross-Connection Guidelines
Rules for connecting wires of the same gauge and cross-wiring between units.
Wire Specification and Tightening Torque
Using specified wires and proper tightening torque for secure connections.
Unit Wiring Separation
Keeping remote controller cords separate from power supply wiring to avoid noise.
Remote Controller Wiring Manual Reference
Guidance to consult the remote controller manual for specific wiring.
Power Supply to Transmission Wiring Error
Warning against connecting power supply to transmission wiring terminals.
General Wiring Practices
Using specified wires, proper connection, and neat wiring arrangement.
Wiring Examples and System Configurations
Power Supply Wiring with Switch and Fuse
How to wire power supply for each unit with a switch and fuse.
Complete System Wiring Examples
Examples of wiring for complete systems (e.g., 3 systems).
Wiring for Single Remote Controller Operation
How to wire for one indoor unit controlled by one remote controller.
Wiring for Group Control or Two Remote Controllers
Wiring configurations for group control or dual remote controller setups.
Wiring with BS Unit Integration
How to wire when a BS unit is included in the system.
Wiring Safety and Control Precautions
Single Switch and Branch Circuit Breaker Selection
Guidelines for selecting switches and breakers for system power.
Group Control Remote Controller Selection
Criteria for choosing a remote controller for group control.
Grounding Equipment Safely
Warnings against improper grounding methods to prevent electric shock.
Field Setting Procedures
Field Setting Configuration
How to make field settings using mode numbers and code numbers.
Referencing Remote Controller Manual for Field Settings
Guidance to consult the remote controller manual for detailed field setting instructions.
Wireless Remote Controller Settings
Wireless Remote Controller Address Setting
Requirement for address setting when using wireless remote controllers.
Dual Remote Controller Operation
Main/Sub Changeover Procedure
How to set one remote controller as MAIN and the other as SUB.
Computerised Control Modes
Wire Specifications for Computerised Control
Details on wire specifications for forced off/on/off operations.
Forced Off and On/Off Operation Actuation
Explains how forced off and on/off operations are triggered by input.
Selecting Forced Off and On/Off Operation Modes
Steps to select forced off or on/off operation modes via the remote controller.
Decoration Panel Installation Guide
Pre-Installation Test Operation
Recommends performing test operation before attaching the decoration panel.
Decoration Panel Fitment and Air Leak Prevention
Ensuring a tight fit to prevent air leaks and condensation.
Test Operation and Error Handling
Outdoor Unit Test Operation Reference
Directs user to the outdoor unit manual for test operation.
Error Display and Troubleshooting
How to interpret error codes on the remote controller display for troubleshooting.
Wiring and Power Check for Displayed Errors
Common error conditions related to wiring or power supply issues.
Centralized Control Setup
Group Designation for Centralized Control
Requirement to designate group numbers for centralized control.
Maintenance Procedures
Qualified Personnel Requirement
Emphasizes that only qualified personnel should perform maintenance.
Power Interruption Before Maintenance
Instruction to interrupt all power supply circuits before accessing terminals.
Cleaning Precautions for Components
Warnings against using high-temperature water/air or specific chemicals for cleaning.
Heat Exchanger Cleaning Precautions
Steps for cleaning the heat exchanger and potential component damage.
Air Filter Cleaning Instructions
Air Filter Cleaning Trigger
When to clean the air filter based on the display indicator.
Cleaning Frequency Adjustment
Increasing cleaning frequency in contaminated environments.
Suction Grill Opening and Filter Removal
Steps to open the suction grill and remove the air filter.
Air Filter Cleaning Methods
How to clean the air filter using a vacuum cleaner, water, or detergent.
Air Filter Re-attachment
How to properly re-install the air filter.
Suction Grill Re-attachment
How to re-attach the suction grill after cleaning.
Suction Grill Cleaning Instructions
Suction Grill Opening and Detachment
Steps to open and detach the suction grill.
Suction Grill Cleaning
How to clean the suction grill with detergent.
Disposal Requirements
Compliance with Disposal Legislation
Adhering to local and national laws for unit dismantling and disposal.
Wiring Diagram Details
Wiring Legend and Symbols
Explanation of wiring symbols, colors, and component labels.
Component Label Definitions
Definitions for various electrical components and terminals used in the wiring diagram.
Optional Part Connections
Notes on connecting optional parts and central remote controllers.
Forced Off/On/Off Control Connection
How to connect for forced off or on/off control operations.
Remote Controller Combination Variations
How remote controller types vary based on system combinations.
Need help?
Do you have a question about the FXZQ50M8V1B and is the answer not in the manual?
Questions and answers