K ~ A5 Distance; A6 Crossover Frequency; A7 Test Tone - Denon AVR-1508 Owner's Manual

ENGLISH

k ~ A5 Distance

Set distance from listening position to speakers.
Before making the settings, measure the distance from the
listening position to the different speakers.
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
8 F L
1 5 S W
Distance measurement
Select the speaker you want to set, then set the distance.
Set the value closest to the measured distance.
[Variable range]
0ft ~ 60ft
: Settable in units of 1 foot.
NOTE
Set the distance between the listening position and the various
speakers to no more than 20 ft.

Operations
( v page 19)

A6 Crossover Frequency

Select crossover frequency from which subwoofer handles low
range signal.
[Display]
1 . S p 2 . I n 3 . O p
Q
Q
1 2 f t
[Selectable items]
Q 40Hz 60Hz
1 2 f t
200Hz 250Hz
Only the portion of the bass sound of the various speakers output
from the subwoofer that has a frequency below the frequency set
here is output.
Set this according to the low frequency reproduction capabilities of the
speakers you are using.
• The "Crossover Frequency" can be set when there are speakers that
have been set to "Small" at "System Setup" – "Speaker Setup" or
when "Subwoofer" is set to "Yes" (vpage 20).
• For speakers set to "Small" , sound below the crossover frequency
is cut from the sound output. The cut bass sound is output from the
subwoofer or front speakers.
• Always set the crossover frequency to "80Hz" . When using small
speakers, however, we recommend setting the crossover frequency
to a higher frequency.
Q
S p e a k e r S e t u p
Q
1 6 C r . O v e r 8 0 H z
80Hz 90Hz 100Hz 110Hz 120Hz 150Hz
:

A7 Test Tone

Adjust channel levels to obtain equal volume from all speakers.
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
1 7 T . T o n e Y e s <
T . T o n e A u t o >
T e s t T o n e O n
A u t o - F L
Test Tone
Select test tone playback method.
[Selectable items]
Auto
: Automatically switch speaker from which test tone is
output.
Manual
: Manually switch speaker from which test tone is output.
Test Tone Start
Press the o button to select "Yes" , then press the o p button to select
"Auto" or "Manual" .
Then press the i button. Out put the test tone.
Auto : Press the o p button to adjust the volume.
Manual : Press the u i button to select the speaker, then press the
o p button to adjust the volume.
When the adjustments are completed, press the ENTER button to
finish the test tone.
–12dB ~ ~ +12dB
0dB
[Variable range]
Q
Q
Q
Q
Q