Selecting The Dolby Digital And Dts Surround Mode (Only With Digital Input) - Denon AVR-1707 Operating Instructions Manual

Basic Operation
Selecting the Dolby Digital and DTS Surround
mode (only with digital input)
1
Select an input source for which digital (COAXIAL or
OPTICAL) is set ( page 39).
2
INPUT MODE
Press to select "AUTO".
3
[STANDARD]
Press to select "STANDARD (Dolby/DTS
Surround)".
4
Play a program source with the
• " " or " " lights, depending on the source.
Operate < SURROUND BACK > to switch Surround Back CH ON/OFF.
The SURROUND BACK indicator lights when < SURROUND BACK >
is on.
5
SURROUND PARAMETER
Press .
6
D D H H
Press to select the item, then press
The parameter switches as shown below each time the button is
pressed.
CINEMA EQ D.COMP. LFE TONE DEFEAT
DEFAULT SURROUND BACK
If you do want the bass and treble to be adjusted, turn off the
tone defeat mode.
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble sound.
Effective source mode
Dolby Pro Logic II x / Dolby Pro Logic / Dolby Digital /
DTS Surround / DTS NEO:6
D.COMP.:
The dynamic range is compressed. Select one of four modes:
"OFF", "LOW", "MID" (middle) or "HIGH".
Effective source mode
Dolby Digital /
DTS (For DTS sources, only displayed for compatible software.)
LFE:
To play the various types of software properly, we recommend
setting to the values shown below.
• To play Dolby Digital software: "0 dB"
• To play DTS movie software: "0 dB"
• To play DTS music software: "–10 dB"
, mark. TONE:
Adjust the tone control.
Can be set in surround modes other than direct mode.
Can be set separately for the different surround modes.
(Adjusted together for the Dolby/DTS SURROUND modes.)
SB CH OUT:
Select the play mode or surround back channel playback method.
• The SURROUND BACK indicator lights.
(1) For multi-channel sources
F F G G • SB OFF (OFF):
to set.
Not played.
• NON MTRX:
Surround channel signal played.
• MTRX ON:
Surround channel signal played with digital matrix processing.
• ES MTRX:
DTS signal played with digital matrix processing.
• ES DSCRT:
Signal included in DTS-ES discrete 6.1-channel sources played.
• PL II x CINEMA:
Decoded in Dolby Pro Logic
played.
Set the surround back speaker to "2sp" at Speaker
Configuration mode (
II
• PL x MUSIC:
Decoded in Dolby Pro Logic
played.
Set the surround back speaker to "1sp" or "2sp" at Speaker
Configuration mode (
(2) For 2-channel sources
7
• Select "DEFAULT Y/N" and press F F to reset all the settings.
¢ Dialog normalization function
This operates automatically when playing Dolby Digital sources.
This is a function for automatically correcting the standard signal level
for different program sources. The correction value can be checked by
pressing [STATUS].
The numbers are the correction value when corrected to the standard level.
II
x Cinema mode, surround back signal
page 43, 44).
II
x Music mode, surround back signal
page 43, 44).
21
ENGLISH
• OFF: Not played.
• ON: Surround channel signal played.
ENTER SURROUND PARAMETER
Press or
O f f s e t - 4 d B
ENGLISH
Basic Operation
.