Denon AVR-1306 Operating Instructions Manual page 29

Basic Operation
• DEFAULT setting
D E F A U L T Y / N
YES Y/N
Select "YES" to reset to the factory defaults.
5
ENTER
Press the button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
2 Operating the surround mode and the surround
parameters from the main unit's panel
1
SELECT
Turn the
mode.
NO
When turned clockwise:
DIRECT
MONO MOVIE
ROCK ARENA
VIRTUAL SURROUND
When turned counterclockwise:
DIRECT
MONO MOVIE
ROCK ARENA
VIRTUAL SURROUND
To select the surround mode while adjusting the surround
parameters, tone defeat or tone control, press the
SURROUND MODE button, then operate the selector.
2
Press and hold in the
button to select the parameter you want to set.
The parameters which can be set differ for the different
surround modes are displayed. (Refer to "Surround modes
and parameters" (
3
Display the parameter you want to adjust, then
SELECT
turn the
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
knob to select the surround
STEREO DOLBY PRO LOGIC II
5CH STEREO DTS NEO:6
JAZZ CLUB VIDEO GAME
MATRIX
II
STEREO DOLBY PRO LOGIC
5CH STEREO DTS NEO:6
JAZZ CLUB VIDEO GAME
MATRIX
SURROUND PARAMETER
page 40).)
knob to set it.
26
ENGLISH
2 Surround parameters r
ROOM SIZE:
This sets the size of the sound field.
There are five settings: "small", "med.s" (medium-small),
"medium", "med.l" (medium-large) and "large". "small"
recreates a small sound field, "large" a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level
if the sound seems distorted.
DELAY TIME:
The delay time can be set within the range of 0 to 110 ms only
in the matrix mode.
TONE CONTROL:
This can be set individually for each surround mode except
DIRECT.
ENGLISH
Basic Operation