Brother NC9100H - NC 9100h Print Server Network User's Manual page 149

During the installation you are presented with the following screen,
select the default unless you have previously installed this software.
If this is the case use a port number that has not been previously
configured. Example BFP2
You also need to enter certain information into the printer driver
dialog screen as illustrated below.
It is very important that you enter your own E-mail address. You also
need to configure the SMTP mail server IP address or host name as
illustrated above.
If in any doubt contact your Network Administrator for
assistance
14 - 3 BROTHER INTERNET FAX PRINTING SOFTWARE
When Installing BFP on Windows
2000/XP and Windows NT
operating systems we recommend
that you add a ":" to the end of the
port name so
BFP1 = BFP1:
Here you can enter the default E-mail
address NC-9100h or you can leave it
blank.
* If an address is specified here this
will always be used as default
sending address.
This can be the host
name or IP address of
the E-mail server
®
®
4.0