Gateway; Host Name - Brother NC9100H - NC 9100h Print Server Network User's Manual

Gateway

This field displays the current gateway or router address used by the
DCP/MFC. If you are not using DHCP or BOOTP to obtain the
gateway or router address, enter the address you wish to assign. If
you do not have a gateway or router, leave this field blank. Check
with your network manager if you are unsure.
1
(For MFC) Press
(For DCP) Press
2 1
Select to change. Enter the Gateway address.
3 Set
Press .
4 Stop/Exit
Press

Host Name

You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
1
(For MFC) Press
(For DCP) Press
2 1
Select to change. Enter the Host Name.
3 Set
Press .
4 Stop/Exit
Press
10 - 6 FRONT PANEL SETUP MENU
Menu 6 1 4
, , , .
Menu 4 1 4
, , , .
.
Menu 6 1 5
, , , .
Menu 4 1 5
, , , .
.