Denon PMA-2000IVR Operating Instructions Manual page 8

Cautions on Connections
• Do not plug in the power cord until all connections are
completed.
• Be sure to connect the left and right channels properly.
• Insert the plugs securely. Incomplete connections can
result in noise.
• Use the SWITCHED AC OUTLETS to plug in audio
components. Do not use them for hair dryers or other
appliances.
DVD player (sound only)
B
Tuner
CD player
LINE OUT
LINE OUT
LINE OUT
AV Center
Tape deck or MD recorder
LINE IN (REC)
Tape deck or CD-R
LINE IN (REC)
B
LINE OUT (PB)
8
• Note that placing the pin plug cords next to power supply
cords or near power transformers may result in humming or
other noise.
• The PHONO input jacks have an extremely high sensitivity,
so avoid turning up the volume when no pin plug cords are
connected. Doing so may result in induction humming
(booming) from the speakers. When pin plug cords are not
connected, insert the included short-circuit pin plug.
DVD player (sound only)
B
Turntable
(for MC, MM)
LINE OUT
Ground wire
Connect the ground wire,
but disconnect it if humming
or other noise is generated.
Subwoofer
LINE IN
Power amplifier
SPEAKER SYSTEM (A)
L R L
Power supply cord
HIGH HIGH
LOW LOW
R L
SPEAKER SYSTEM (BI-WIRING)
When bi-wiring with bi-wireable speakers,
connect the mid and high range terminals
to SYSTEM (A) (or SYSTEM (B)), the low
range terminals to SYSTEM (B) (or
SYSTEM (A)).
SPEAKER SYSTEM (B)
R