Denon PMA-2000IVR Operating Instructions Manual page 11

Denon integrated stereo amplifier operating instructions pma-2000ivr
Hide thumbs Also See for PMA-2000IVR:
Table of Contents

Advertisement

Remote Control Unit RC-858 supplied with the PMA-2000IVR
AMP
POWER
MUTING
9
8
TRACK
FUNCTION
VOLUME
3
2
1
PAUSE
STOP
PLAY
CD
B
REMOTE CONTROL UNIT
RC-858
• The RC-858 Remote Control Unit can control CD players manufactured by DENON.
• Note that operation may not be possible for some models.
CAUTION:
Some of the functions of the PMA-2000IVR can also be controlled with the remote control units included with other DENON pre-
main amplifiers.
CD player Block
Use these to control the CD player
connected to the PMA-2000IVR.
PLAY
: Playback
1
STOP
: Stop
2
PAUSE : Pause
3
: Auto search
8
(to beginning of track)
: Auto search
9
(to beginning of track)
NOTE:
With DENON portable CD players and
some other CD players, the auto
search mode is set when the
button is pressed shortly then
9
released, and the manual search mode
is set when one of the buttons is held
in.
Pre-main Amplifier Block
Use these to control the PMA-2000IVR.
MUTING :
When pressed, the main unit's power
LED flashes and the speaker output is
turned off. When pressed again, the
mute mode is canceled and the power
LED stops flashing (remaining lit).
POWER :
• When the main unit's power switch is set
to the ON/STANDBY position (
this to turn the PMA-2000IVR's power on
and off.
• When the power is turned off from the
remote control unit, the main unit's
power LED remains lit, but the input LED
turns off, indicating that the PMA-
2000IVR is in the standby mode.
• When the main unit's power button is set
to the OFF position (
power off from the remote control unit
and then set back to the ON/STANDBY
position (
the operating mode.
VOLUME • UP :
While this is pressed, the main unit's
or
8
volume control turns clockwise and the
volume increases.
VOLUME ª DOWN :
While this is pressed, the main unit's
volume control turns counterclockwise
and the volume decreases.
FUNCTION • :
Use this to select the program source to
be played. The function switches in the
following order each time this is pressed:
CD / TUNER / DVD/AUX-1 / AUX-2/
P. DIRECT / TAPE-2/MD / TAPE-1/CD-R
/ PHONO / CD
FUNCTION ª :
Use this to select the program source to
be played. The function switches in the
following order each time this is pressed:
CD / PHONO / TAPE-1/CD-R / TAPE-
2/MD / AUX-2/P. DIRECT / DVD/AUX-1
/ TUNER / CD
¢
), press
£
) after turning the
), the PMA-2000IVR is set to
¢
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pma-2000

Table of Contents