Advertisement
Table of Contents
- 1 Table of Contents
- 2 Your Safety and that of Others
- 3 Key to Diagrams
- 4 Description
- 5 Pictures
- 6 Technical Specifications
- 7 HST Oil Replacement AV98X
- 8 Operating Instructions
- 9 Maintenance
- 10 Cleaning
- 11 Machine Lubrication Points
- 12 Maintenance Schedule
- 13 Prolonged Storage - Winter Storage
- 14 Troubleshooting
- 15 Warranty
- 16 Ec Declaration of Conformity
- Download this manual
Advertisement
Table of Contents
Related Manuals for Etesia AV98X
Summarization of Contents
Your Safety and That of Others
Mower Identification
Identifies the ride-on brush-cutter using its unique identification number for dealer reference.
Key to Diagrams - Safety
Labels
Explanation of various safety and operating labels affixed to the ride-on brush-cutter.
Engine Diagrams
Visual representation and explanation of engine-related safety symbols and warnings.
Safety Labels
Details on safety labels and their meanings for safe operation.
Marking of Accumulators
Information on battery markings, including hazardous material indicators.
HST Oil Replacement AV98X
Removal of the Subframe
Procedure to remove the subframe for access to HST unit and tank for maintenance.
HST Oil Drain
Steps to drain the hydraulic fluid from the HST unit and tank.
Front Wheel Unit Oil Change
Procedure for changing the oil in the front wheel hydrostatic units.
Replacement of the Oil Filter
Instructions for replacing the HST unit oil filter.
Refill the HST and Tank
Guidance on refilling the HST unit and tank with the correct oil.
Refilling the Front Wheel Unit
Instructions for refilling the front wheel hydrostatic units with oil.
Put Circuit in Service (Front & Rear Units)
Steps to circulate oil within the system after refilling.
Check the Transmission and Drive
Procedure to verify the transmission function and oil level after maintenance.
Operating Instructions
Pre-Delivery Inspection and Safety
Covers initial inspection procedures and essential safety system checks.
Fuel Handling
Guidelines for safe and proper handling of fuel.
Machine Operation Controls
Explains drive controls, speed selection, differential lock, and engine starting/stopping.
Cutter Operation
Instructions for starting, stopping, and adjusting the cutting mechanism.
Driving Procedures
Covers driving the machine, cutting height adjustment, and operation on slopes.
Maintenance
Engine Maintenance
Details on checking and changing engine oil, filters, spark plug, and cooling system.
Transmission Maintenance AV95/AV98
Procedures for checking and changing oil in the AV95/AV98 transmission.
Transmission Maintenance AV98X
Procedures for maintaining the AV98X transmission, referring to HST oil replacement.
Battery Maintenance
Guidance on checking and charging the 12V battery, including safety precautions.
Tyre Maintenance
Instructions for checking tyre pressure and handling used pneumatics.
Blade Maintenance
Covers blade condition checks, dismantling, changing, and replacement procedures.
Cleaning
Cleaning Cutting Unit Housing
Instructions for cleaning the cutting unit housing after use or dismantling.
Troubleshooting
Moving the Ride-on Brush Cutter with Engine Switched Off
Procedure for moving the machine when the engine is not running.
Towing the Machine in the Event of Breakdown
Instructions for towing the machine safely in case of a breakdown.
Changing Tyres
Steps and safety precautions for removing and changing machine tyres.
Warranty
Definitions
Provides definitions for terms used in the warranty section.
General Warranty Conditions
Outlines the general terms and conditions for ETESIA's warranty.
Contractual Warranty
Details the specific terms and duration of the contractual warranty offered by ETESIA.
Need help?
Do you have a question about the AV98X and is the answer not in the manual?
Questions and answers