Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-2CD4026FWD 14.33
Summarization of Contents
Regulatory Information
FCC Information
Details on FCC compliance and operational conditions for the device.
EU Conformity Statement
Information on European conformity standards and directives the product complies with.
Product Key Features
General Features
Core functionalities including camera connectivity and stream encoding capabilities.
Local Monitoring Features
Capabilities for local display, including multi-screen views and output settings.
HDD Management Features
Options for connecting, managing, and optimizing hard disk drives for storage.
Recording and Playback Features
Functions related to recording modes, schedules, and playback of recorded data.
Introduction to the DVR
Front Panel Overview
Description and function of the DVR's front panel components and indicators.
IR Remote Control Usage
Instructions on using the infrared remote control for DVR operation.
USB Mouse Operation
How to use a USB mouse for controlling the DVR's interface and functions.
On-Screen Keyboard Input
Explanation of the on-screen soft keyboard input methods and their icons.
Rear Panel Overview
Details and identification of the ports and connectors on the DVR's rear panel.
Getting Started with Your DVR
DVR Startup and Shutdown Procedures
Procedures for properly starting up and shutting down the DVR to ensure longevity.
Basic Configuration Wizard Setup
Step-by-step guide for initial DVR setup using the configuration wizard.
Connecting IP Cameras
Instructions on how to add and connect IP cameras to the DVR system.
Live View Operations
Introduction of Live View
Overview of the live view function and its icons for monitoring camera feeds.
Operations in Live View Mode
Exploring various functions and controls available within the live view interface.
Using the Mouse in Live View
Detailed mouse operations for navigating and interacting within the live view screen.
Using an Auxiliary Monitor
How to utilize an auxiliary monitor for additional live view displays and features.
Main/Aux Output Switching
Procedure for switching between main and auxiliary video outputs for display.
Quick Setting Toolbar in Live View Mode
Using the quick setting toolbar for rapid access to common live view functions.
Adjusting Live View Settings
Customizing live view settings like output interface, dwell time, and camera order.
Manual Video Quality Diagnostics
Performing manual diagnostics on analog camera video quality for troubleshooting.
User Logout
Steps to log out from the DVR system, returning to the live view mode.
PTZ Controls
Configuring PTZ Settings
Setting up parameters for controlling PTZ cameras before operation.
Setting PTZ Presets, Patrols & Patterns
How to configure PTZ presets, patrol paths, and motion patterns for automated camera movement.
Customizing Presets
Steps to set specific PTZ camera positions (presets) for event triggering.
Calling Presets
Activating preset camera positions for specific events or scenarios.
Customizing Patrols
Defining patrol paths by setting key points, duration, and speed for PTZ cameras.
Calling Patrols
Executing predefined patrol paths for PTZ cameras.
Customizing Patterns
Recording and setting PTZ camera movement paths as patterns.
Calling Patterns
Activating recorded PTZ camera movement patterns.
Customizing Linear Scan Limit
Configuring horizontal scan limits for PTZ cameras within a defined range.
Calling Linear Scan
Initiating the linear scan function for PTZ cameras within the predefined range.
One-touch Park
Setting up automatic park actions (scan, preset, patrol) after inactivity.
PTZ Control Panel
Overview of the PTZ control panel icons and their functions for camera manipulation.
Recording Settings
Configuring Encoding Parameters
Setting up parameters for video and audio encoding for recording.
Configuring Record Schedule
Defining schedules for automatic start and stop of recording based on time and events.
Configuring Motion Detection Record
Setting up motion detection parameters and configuring recording actions upon event detection.
Manual Record
Initiating and managing manual recording sessions without a predefined schedule.
Configuring Holiday Record
Setting up specific recording schedules for holidays throughout the year.
Configuring Redundant Recording
Enabling redundant recording to enhance data safety by saving files on multiple HDDs.
Configuring HDD Group for Recording
Organizing HDDs into groups to manage recording destinations for specific channels.
Files Protection
Methods to protect recorded files from being overwritten by locking files or setting HDD to read-only.
Playing Back Record Files
Playing Back by Channel
Playing back recorded video from a specific camera channel in live view mode.
Playing Back by Time
Searching and playing back recorded video files within a specified time duration.
Playing Back by Event Search
Finding and playing back recordings triggered by specific event types like alarm or motion.
Playing Back by Tag
Using video tags to search for and play back related information or specific time points.
Smart Playback
Utilizing smart playback to efficiently review video by marking motion events.
Playing Back by System Logs
Playing back record files associated with system log entries for analysis.
Playing Back External File
Looking up and playing back video files stored on external devices.
Auxiliary Functions of Playback
Playing Back Frame by Frame
Reviewing video files frame by frame for detailed inspection of events.
Smart Search
Locating motion detection events accurately by analyzing specific areas dynamically.
Backing up Record Files
Quick Export
Rapidly exporting record files to backup devices like USB flash drives.
Backing up by Normal Video Search
Backing up files using normal video search criteria to various devices.
Backing up by Event Search
Exporting event-related record files using USB devices or DVD-R/W.
Backing up Video Clips
Selecting and exporting specific video clips directly during playback.
Setting Motion Detection
Set Detection Area and Sensitivity
Configuring motion detection zones and sensitivity levels for cameras.
Trigger Channel Configuration
Selecting channels that will record or display full-screen when motion is detected.
Arming Schedule Configuration
Setting the schedule for when motion detection is active.
Linkage Action Configuration
Defining actions to be taken when a motion alarm is triggered.
Detecting Video Loss
Set Handling Method
Configuring how the DVR handles video loss detection events.
Arming Schedule Configuration
Setting the schedule for when video loss detection is active.
Linkage Action Configuration
Defining actions to be taken when a video loss alarm is triggered.
Detecting Video Tampering
Enable Video Tampering and Sensitivity
Configuring tamper detection and sensitivity levels for cameras.
Arming Schedule and Linkage Actions
Setting schedules and response actions for video tampering alarms.
Setting All-day Video Quality Diagnostics
Enable Diagnostics and Set Thresholds
Enabling video quality diagnostics and setting thresholds for exceptions.
Arming Schedule and Linkage Actions
Setting schedules and response actions for video quality diagnostic alarms.
Handling Exceptions
Enable Event Hint and Select Detailed Event
Configuring event hints and selecting detailed information for exceptional events.
Set Alarm Linkage Actions
Defining alarm linkage actions for various system exceptions.
Network Settings
Configuring General Settings
Configuring basic network parameters like IP address, gateway, and DNS.
Network Settings Interface
Interface for configuring general network parameters like IP address and DNS.
Working Modes
Understanding different network working modes: Multi-address, Net-fault Tolerance, Load Balance.
Configuring Advanced Settings
Detailed configuration for advanced network features.
Configuring PPPoE Settings
Setting up Point-to-Point Protocol over Ethernet (PPPoE) for DVR network access.
Configuring Extranet Access
Configuring Dynamic DNS (DDNS) for accessing the DVR over the internet.
DDNS Settings Interface
Interface for configuring Dynamic DNS settings for remote access.
DDNS Types Configuration
Details on configuring various DDNS types like IPServer, DynDNS, PeanutHull, NO-IP.
Configuring NTP Server
Setting up a Network Time Protocol (NTP) server for accurate system date and time.
Configuring SNMP
Using SNMP protocol to monitor device status and retrieve parameter information.
Configuring NAT
Enabling Universal Plug and Play (UPnP™) for seamless network discovery and connection.
UPnP™ Settings Interface
Interface for configuring UPnP™ settings, including Auto or Manual port mapping.
Configuring the Remote Alarm Host
Setting up a remote alarm host to receive alarm events and exception messages.
Configuring Multicast
Configuring multicast for live viewing of more than 128 cameras over the network.
Configuring RTSP
Setting up Real Time Streaming Protocol (RTSP) for controlling streaming media servers.
Configuring Server and HTTP Ports
Changing the default server and HTTP ports for network settings.
Configuring HTTPS Port
Setting the HTTPS port for secure web server communication and protection.
Configuring Email
Configuring email notifications for detected events like alarms or motion.
Telnet Settings
Enabling Telnet for advanced access and configuration via command input.
Checking Network Traffic
Network Traffic Interface
Interface to view real-time network information like linking status and rates.
Configuring Network Detection
Testing Network Delay and Packet Loss
Testing network delay and packet loss to verify network connectivity status.
Exporting Network Packet
Exporting captured network data packets to backup devices for analysis.
Checking Network Status
Checking the current network status and quickly setting network parameters.
Checking Network Statistics
Viewing real-time network statistics, including bandwidth usage for different functions.
Initializing HDDs
HDD Information Interface
Interface for viewing HDD information and status before initialization.
Confirm Initialization
Confirmation dialog for erasing data and initializing the HDD.
Start Initialization
Initiating the HDD initialization process.
HDD Status Changes to Normal
Status update of HDD after successful initialization.
Managing Network HDD
Add NAS Disk
Adding network-attached storage (NAS) disks as network HDDs.
Add IP SAN Disk
Adding IP SAN disks as network HDDs for storage.
Initialize Added NetHDD
Initializing newly added network HDDs before they can be used.
Managing HDD Group
Setting HDD Groups
Organizing multiple HDDs into groups for managing recording destinations.
Setting HDD Property
Setting HDD properties to Redundancy, Read-only, or Read/Write (R/W).
Configuring Quota Mode
Storage Mode Settings Interface
Interface for setting storage modes, including Quota for camera storage.
Copy Settings to Other Camera(s)
Copying quota settings from one camera to others.
Checking HDD Status
View HDD Status (1)
Checking HDD status via the HDD Information interface.
View HDD Status (2)
Checking HDD status via the System Information interface.
Checking S.M.A.R.T Information
S.M.A.R.T Settings Interface
Interface for viewing HDD Self-Monitoring, Analysis, and Reporting Technology data.
Detecting Bad Sector
Bad Sector Detection
Detecting bad sectors on the HDD to check its status and health.
Configuring HDD Error Alarms
Configure HDD Error Alarm
Setting up alarms for HDD errors (Uninitialized or Abnormal status).
Configuring OSD Settings
OSD Configuration Interface
Interface for configuring On-Screen Display settings like date, time, and camera name.
Copy Settings to Other Cameras
Copying OSD settings from one camera to multiple other cameras.
Configuring Privacy Mask
Privacy Mask Settings Interface
Interface for setting up privacy mask zones to obscure sensitive areas.
Set Privacy Mask Area
Drawing privacy mask zones on the video feed to mask specific areas.
Configuring Video Parameters
Image Settings Interface
Adjusting image parameters like brightness, contrast, and saturation for video feeds.
DVR Management and Maintenance
Viewing System Information
Accessing and viewing system information about the DVR and its components.
Viewing Device Information
Displaying general device information such as model, serial number, and firmware version.
Viewing Camera Information
Viewing the status and configuration of each connected camera.
Viewing Record Information
Viewing recording status and encoding parameters for each camera.
Viewing Alarm Information
Displaying information related to triggered alarms and their status.
Viewing Network Information
Viewing network configuration details and status for the DVR.
Viewing HDD Information
Checking HDD status, capacity, free space, and property details.
Searching and Exporting Log Files
Log Search Interface
Interface for searching system logs based on time, type, and other criteria.
Log Search Results
Displaying the results of a log search, including detailed information and video links.
Log Details
Viewing detailed information of a specific log entry.
Export Log Files
Exporting system log files to a backup device.
Importing/Exporting IP Camera Info
IP Camera Import/Export Tab
Managing IP camera configuration files for backup and transfer.
Importing/Exporting Configuration Files
Import/Export Config File
Exporting DVR configuration for backup or importing to other devices.
Upgrading System
Upgrading by Local Backup Device
Updating the DVR firmware using a local backup device.
Upgrading by FTP
Updating the DVR firmware using a remote FTP server.
Configuring General Settings
General Settings Interface
Configuring basic system settings like language, time zone, and resolution.
Managing User Accounts
Adding a User
Creating new user accounts with specific permission levels (Operator, Guest).
User Permission Settings Interface
Defining operating permissions for local and remote configurations for user accounts.
Deleting a User
Removing existing user accounts from the DVR system.
Editing a User
Modifying user information, password, and permissions for existing accounts.
Logging out/Shutting down/Rebooting Device
Shutdown Menu
Accessing the menu to log out, shut down, or reboot the DVR.
Troubleshooting
No Image Displayed on Monitor
Resolving issues where no image is shown on the monitor after startup.
Beep Sound After Device Startup
Troubleshooting the beep sound indicating potential HDD issues or absence.
Live view Stuck When Video Outputs Locally
Resolving issues of live view freezing due to frame rate or encoding parameters.
No Sound or Too Much Noise in Live View Audio
Troubleshooting audio problems in live view, checking cables and stream type.
Image Stuck During Playback
Addressing image freezing during single or multi-channel playback.
No Record File Found
Resolving the 'No record file found' error when searching for recorded files.
Need help?
Do you have a question about the DS-2CD4026FWD 14.33 and is the answer not in the manual?
Questions and answers