Advertisement
Table of Contents
1. Read all instructions carefully before operation.
2. Avoid pinched o-rings during installation by applying (provided with install kit) NSF certified
lubricant to all seals.
3. This system is not intended for treating water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
REVISION #
5
REVISION DATE 4/29/14
80150308
485HTO
Hardness, Taste & Odor
Reduction System
WQA Tested and Certified according to NSF/ANSI 44 for
effective reduction of hardness (calcium and magnesium) as
verified and substantiated by test data.
Tested and Certified by the Water Quality Association to CSA
B483.1.
Proud member of Canadian Institute of Plumb-
ing & Heating.
Proud member of Canadian Water Quality Asso-
ciation.
Canadian Head Office
655 Park St.
Regina, SK S4N 5N1
Eastern Sales & Distribution
20 Steckle Place, Unit 21
Kitchener ON N2E 2C3
Advertisement
Table of Contents
Related Manuals for NOVO 485HTO-150
Summarization of Contents
Before Starting Installation
Tools, Pipe, and Fittings, Other Materials
List of necessary tools, pipes, and fittings required for the installation process.
System Start-Up
Key Pad Configuration
Explanation of the control panel buttons and their functions for system setup.
Manual Regeneration (Step / Cycle Valve)
How to initiate manual regeneration cycles or step through valve positions.
Start-up Instructions
Procedure for powering up the system and performing initial operational checks.
Programming Instructions
Set Hardness
Setting the maximum compensated water hardness in grains per gallon for system capacity calculation.
Salt Setting
Options for determining salt dosage and capacity, affecting efficiency and regeneration frequency.
Regen Time
Determining the scheduled time of day for automatic system regeneration.
About The System
Control Operation During A Power Failure
How the system maintains settings and resumes operation after a power interruption.
Main Display
Description of the main display screen, its diagnostic pages, and manual scrolling.
Safety Float
Explanation of the safety float mechanism preventing brine tank overfilling.
Precision Brining Regeneration Process
Automatic Hard Water Bypass During Regeneration
How hard water is supplied during regeneration cycles to maintain household supply.
Maintenance
Adding Salt
Instructions for checking and adding the correct type and level of salt to the brine tank.
Bridging
Explanation of salt bridging and methods for resolving this common maintenance issue.
Care of Your System
Resin Cleaner
Information on approved resin cleaners and their usage for iron-containing water.
Sanitizing Procedure
Procedure for sanitizing the water softener, recommended during installation.
Warranty
Seven Year Complete Parts Guarantee
Coverage details for replacement parts failing within 84 months from the date of manufacture.
Life Time Warranty on Mineral Tanks and Brine Tanks
Lifetime warranty for mineral and brine tanks against failure, with specific exclusions.
General Conditions
Terms and conditions of the warranty, including exclusions for misuse, neglect, and natural forces.
Need help?
Do you have a question about the 485HTO-150 and is the answer not in the manual?
Questions and answers