Denon AVR-590 Owner's Manual page 31

Making the audio settings (Audio Setup)
Make settings for audio playback.
Setting items
Auto Surround Mode ON : Memorize settings. Most recently stored surround mode is
Make setting for memorizing automatically selected.
surround mode setting for
OFF : Do not memorize settings. Surround mode does not change
each input signal type.
according to input signal.
The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM, etc.)
EQ Customize Audyssey Byp. L/R / Audyssey Flat / Manual
Set so that unused equalizer • Used
settings are not displayed •
Not Used
when is used.
NOTE
• Set so that the "Audyssey Byp. L/R" and "Audyssey Flat" settings can be
made when the Audyssey Auto Setup procedure is performed.
• Equalizer settings for which "Not Used" is set with the Quick Select
function cannot be stored and called out.
Remote control
operation buttons
Default settings are underlined.
Setting contents
Displaying the menu
: Moves the cursor (Up/Down/Left/Right)
:
Cancel the menu
Making other settings (Option Setup)
Setting items
Volume Display : Set the volume display method.
Volume Control
Set the MAIN ZONE volume
• Relative : The volume is displayed within the range of – – –dB (Minimum),
setting.
–80 dB ~ +18 dB.
• Absolute : The volume is displayed within the range of 0, 1 ~ 99.
Vol.Limit : Make a setting for maximum volume.
• OFF : Do not set a maximum volume.
• –20dB(61) / –10dB(71) / 0dB(81)
Power On Level : This sets the volume set when the MAIN ZONE's power
is turned on.
• Last : Use the memorized setting from the last session.
• – – – : Always use the muting on condition when power is turned on.
• –80dB(1) ~ +18dB(99) : The volume is adjusted to the set level.
Mute Level : This sets the amount of attenuation of the volume when the
mute mode is set in the MAIN ZONE.
F ull : The sound is cut off entirely.
•
• –40dB : The sound is attenuated by 40 dB.
• –20dB : The sound is attenuated by 20 dB.
Source Delete TUNER / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select the
Remove input sources sources you do not want to use.
O N : Use this source.
that are not used from the •
display. • Delete : Do not use this source.
NOTE
• The currently selected input source cannot be set.
• Input sources set to "Delete" cannot be selected using
On-Screen Display Screensaver : Make screensaver settings.
O N : The screen switches to the screensaver if no operation is performed
Make the settings related to
•
displays on the TV screen.
for approximately 3 minutes while a menu is displayed or while an iPod
screen is displayed. When you press
cancelled and the screen before that screen saver started is displayed.
• OFF : Turn the screensaver function off.
:
Text The mode name is displayed when the operation for switching the
surround mode, input mode, etc., is performed.
• ON : Turn display on.
• OFF : Turn display off.
Master Volume
• Bottom : Displayed at the bottom of the screen.
• Top : Displayed at the top of the screen.
• OFF : Turn display off.
: Decision the setting
Making detailed settings (Manual Setup)
Default settings are underlined.
Setting contents
uio p , the screen saver is
:
Master volume display during adjustment.
See overleaf
: Return to previous menu
ENGLISH
.