Denon AVR-590 Owner's Manual page 30

ENGLISH
Making the HDMI settings (HDMI Setup)
Make settings for HDMI video/audio output.
Setting items
Auto Lip Sync
ON : Compensated.
Automatic compensation
OFF : Not compensated.
for timing shift in audio and
video output.
HDMI Audio Out Amp : Use speakers connected to AVR-590 for audio playback.
Select HDMI audio output
TV : Use speakers of TV for audio playback.
device.
NOTE
When the HDMI control function is operating, the setting of audio playback
in the connected TV takes priority (vpage 44 "Controlling HDMI-
compatible devices from the AVR-590 (HDMI Control Function)").
HDMI Control
ON : Use the HDMI control function.
External devices can be
OFF : Do not use the HDMI control function.
controlled from the AVR-
• Please consult the operating instructions for each connected device
590 and the AVR-590 can
to check the settings.
be controlled from external
• For details on the HDMI control function, see "Controlling HDMI-
devices.
compatible devices from the AVR-590 (HDMI Control Function)"
NOTE
(vpage 44).
The HDMI control
NOTE
function controls
• When "Control" is set to "ON" , it consumes more standby power.
operations of a TV that
• When not using this unit for a long period, we recommend that you press
is compatible with the
HDMI control function.
• When the "HDMI Control" setting has been changed, always turn off the
Make sure that the TV
and HDMI are connected power to the connecting devices afterwards and then turn back on.
when you perform HDMI • The "HDMI Control" does not work when the power to the equipment is
off.
control.
Standby Source Last : Standby with last used input source during power on.
Set the HDMI connector for
HDMI1 / HDMI2 / HDMI3 : The standby mode is set at the input source
HDMI signal input during
assigned to the respective.
standby.
This can be set when
"HDMI Control" is set
to "ON" .
Remote control

operation buttons
Default settings are underlined.
Setting contents
to turn off (jOFF) the power.
Displaying the menu
:
Cancel the menu
Setting items
Power Off Control
The power of the AVR-590
and external device turn off
together.
This can be set when
"HDMI Control" is set
to "ON" .
: Moves the cursor (Up/Down/Left/Right)
Making detailed settings (Manual Setup)
Setting contents
ON：Switched.
OFF：Not switched.
• Please consult the operating instructions for each connected device
to check the settings.
• For details on the HDMI control function, see "Controlling HDMI-
compatible devices from the AVR-590 (HDMI Control Function)"
(vpage 44).
: Return to previous menu
: Decision the setting