Toyota AVALON Owner's Manual page 496

POSITION/DIRECTION CALIBRATION
1. Move the cursor mark
desired point by operating the select
and scroll lever of the navigation
controller.
"ENTER"
Push the button on the navi-
gation controller.
2. Operate the select and scroll lever of
the navigation controller, so that the
to your
screen direction is facing to your
desired direction.
"ENTER"
Push the
gation controller, and then the map screen
will be displayed.
AVALON_Navi_U (L/O 0508)
TIRE CHANGE CALIBRATION
The tire
should be used when the tires are re-
placed. This will adjust for any possible
change in tire circumference from the
old tires to the new ones. If this proce-
dure is not performed when tires are
replaced, the current vehicle position
mark may become incorrect.
To execute the fast distance tire calibra-
tion procedure,
change"
screen.
The message appears and the fast dis-
tance calibration is automatically started.
button on the navi-
A few seconds later, the map screen will
be displayed.
2006 AVALON Navigation from Aug. '05 Prod. (OM41416U)
change calibration function
"Tire
select the
switch on the "Calibration"
81