Component With Multi-Channel Output Connectors; Antenna Terminals; External Power Amplifier - Denon AVR-2309 Owner's Manual

Component with Multi-channel Output
connectors
Blu-ray Disc player / DVD player /
External decoder
L R L R
L R L R
• To play the analog input signals input to the EXT. IN connectors,
INPUT MODE
press the button on the main unit or
the remote control unit and select "EXT. IN" or make the settings at
menu "Input Setup" – "Input Mode" – "Input Mode" – "EXT. IN"
(vpage 34).
• The video signal can be connected in the same way as a Blu-ray Disc
player / DVD player (vpage 12).

Antenna terminals

An FM antenna cable plug can be connected directly.
Direction of broadcasting station
FM antenna
L R
75 Ω/ohms
Coaxial cable
L R
FM indoor
antenna
(supplied)
n AM loop antenna assembly
INPUT
button on
Mount
Installation hole Mount
on wall, etc.
1. Push the lever.
AM loop antenna
(supplied)
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.

External Power Amplifier

AM outdoor
Ground
antenna
Remove the vinyl tie and take out
the connection line.
Bend in the reverse direction.
a. With the antenna on top of any
stable surface.
b. With the antenna attached to a
wall.
When using just one surround back speaker, connect it to the left
channel (SBL).
Connection of AM antennas
2. Insert the conductor. 3. Return the lever.
Power amplifier
L R L R L R
L R L R L R
ENGLISH