Table of Contents
Advertisement
ENGLISH
Other Operations and Functions
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
<ZONE2/REC SELECT>
Other Operations
BUTTON
Recording on an External Equipment
<BUTTON>
(REC OUT mode)
[BUTTON]
You can listen to one program source while recording a different
program source.
1
<ZONE2/REC SELECT>
Press
"ZONE2 SOURCE" is shown on the display.
ZONE2 SOURCE
ZONE2 TUNER
RECOUT V.AUX
······
2
<SOURCE SELECT>
Turn
displayed.
The "
" indicator lights.
3
<SOURCE SELECT>
Turn
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment's
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
47).
5
Start recording.
For operating instructions, refer to the respective equipment's
operating instructions.
• To cancel, press
SELECT>
• Make a test recording before starting the actual recording.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit's ZONE2 mode
buttons cannot be operated.
• The source selected for ZONE2 is output from the digital output
.
connector (OPTICAL 2).
NOTE
····
ZONE2 V.AUX
• Digital signals are not output from the analog REC OUT connector.
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
RECOUT TUNER
RECOUT SOURCE
holder.
• Input sources for which "Delete" is selected at "Source Delete"
until "RECOUT Source" is
cannot be selected.
to choose the input source
<ZONE2/REC SELECT>
, then turn
until "ZONE2 SOURCE" is displayed.
<SOURCE
Advertisement
Table of Contents
