Related Manuals for barbas UNICA 70
Summarization of Contents
Instructions for Use
1.1 Introduction
Provides an overview of the BARBAS gas fire and initial user guidance.
1.2 Built-in Protection of the Appliance
Explains safety features like pilot shut-off and flue gas safety systems.
1.3 Operation: Hand Control
Details how to operate using manual control knobs for temperature and burner settings.
1.4 Igniting the Fire
Step-by-step guide on how to safely start the pilot light and main burner.
1.5 Turning Off the Fire
Instructions for safely extinguishing the main burner and the entire appliance.
1.6 Extinguishing the Pilot Light
Procedure to turn off the pilot light for extended non-use periods.
1.7 Operation: Remote Control
Explains the functionality and operation of the remote control system.
1.8 Using the Appliance for the First Time
Guidance on initial operation, including potential smells during the burn-in period.
1.9 Daily Maintenance
Routine checks and cleaning tasks for daily upkeep and safe operation.
Installation Instructions
2.1 General Requirements
Covers general principles for installation by a qualified engineer and regulatory compliance.
2.2 Flue Protection System
Details the T.T.B. security system for flue-related safety shutdowns.
2.3 Installation Preparations
Lists essential preparations and facilities required before installation.
2.3.1 Naturally Ventilated House Installation
Specifies requirements for installation in naturally ventilated house setups.
2.3.2 Mechanically Ventilated House Installation
Specifies requirements for installation in mechanically ventilated house setups.
2.4 General Services and Component Handling
Describes handling and preparation of components like frame, flue, and connections.
2.5 Appliance Positioning
Guidelines for correctly positioning the gas fire insert within the fireplace opening.
2.5.1 Fitting into a New Chimney
Step-by-step guide for installing into a newly constructed chimney system.
2.5.2 Fitting into Larger Existing Openings
Instructions for installing into an existing fireplace opening larger than the unit.
2.5.3 Fitting into Smaller Existing Openings
Guidance for installing into an existing opening equal to or smaller than the unit.
2.6 Post-Installation Checks
Outlines crucial checks after the appliance has been installed and connected.
Maintenance
3.1 Annual Maintenance Schedule
Details essential annual cleaning and inspection by a specialist for safe operation.
Dimensions
6.1 UNICA 50 Dimensions
Technical drawings and measurements for the UNICA 50 model.
6.2 UNICA 52 Dimensions
Technical drawings and measurements for the UNICA 52 model.
6.3 UNICA 65 Dimensions
Technical drawings and measurements for the UNICA 65 model.
6.4 UNICA 70 Dimensions
Technical drawings and measurements for the UNICA 70 model.
6.5 UNICA 100 Dimensions
Technical drawings and measurements for the UNICA 100 model.
Technical Details / Regulations
7.1 Technical Details: Natural Gas (GB/IE)
Specifies technical data, regulations, and performance for Natural Gas models.
Replacement Parts List
8.1 UNICA 50 Replacement Parts
Lists part numbers and descriptions for the UNICA 50 model.
8.2 UNICA 52 Replacement Parts
Lists part numbers and descriptions for the UNICA 52 model.
8.3 UNICA 65 / UNICA 70 Replacement Parts
Lists part numbers and descriptions for UNICA 65 and 70 models.
8.4 UNICA 100 Replacement Parts
Lists part numbers and descriptions for the UNICA 100 model.
Need help?
Do you have a question about the UNICA 70 and is the answer not in the manual?
Questions and answers