Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for TiLite XC
Summarization of Contents
Chapter 1: Warnings
General Warnings
Essential safety precautions for operating the wheelchair, including acclimatization, weight limits, and accident prevention.
Falling and Tipping Over Warnings
Information on center of gravity, stability, balance, and safe practices to prevent falls and tip-overs.
Components and Options Warnings
Safety guidelines for various wheelchair parts, accessories, and their proper use.
Chapter 2: Safety Inspection, Maintenance & Troubleshooting
Introduction
Importance of proper maintenance and safety inspections for optimal wheelchair performance and longevity.
Safety Inspections and Maintenance
Detailed guidance on performing regular safety checks for the wheelchair's components.
Cleaning Procedures
Step-by-step instructions for cleaning the wheelchair frame, upholstery, and moving parts.
Troubleshooting Common Issues
Guidance on identifying and resolving common adjustment and performance problems.
Chapter 3: Footrests
Footrest Adjustment and Replacement
Procedures for adjusting height, angle, depth, and replacing various types of footrests.
Footrest Types and Features
Identification of different footrest types like flip-up, high mount, 90° hanger, and swing-away.
Chapter 4: Backrests, Push Handles and Stroller Handles
Backrest Adjustment and Types
Instructions for adjusting height, and information on fixed backrests for various models.
Push Handles and Stroller Handles
Procedures for adjusting height and installation of push handles and stroller handles.
Chapter 5: Armrests
Armrest Adjustment and Replacement
Guides for adjusting height, replacing, and removing tubular and removable desk armrests.
Armrest Receiver Height Adjustment
Procedures for adjusting the height of armrest receivers on different models.
Chapter 6: Side Guards
Side Guard Types and Maintenance
Instructions for removing, replacing, adjusting, and types of side guards.
Fixed-in-Place Side Guards
Information regarding side guards that are permanently attached to the wheelchair frame.
Chapter 7: Back Upholstery, Seat Upholstery and Seat Cushions
Back Upholstery Replacement and Adjustment
Procedures for replacing and adjusting tension on various back upholstery types.
Seat Upholstery and Cushion Maintenance
Instructions for replacing and adjusting seat slings and seat cushions.
Chapter 9: Axles and Amputee Adapters
Quick-Release Axles
Procedures for adjusting stainless/titanium and quad quick-release axles.
Amputee Adapters
Information on using amputee adapters to shift the center of gravity for increased stability.
Chapter 8: Axle Plates and Camber Plugs (Center of Gravity; Rear Seat Height)
Center of Gravity and Rear Seat Height Adjustment
Guides for adjusting CoG and seat height by modifying axle plates and camber plugs for different models.
Rear Wheel Spacing and Alignment
Procedures for adjusting wheel spacing, replacing camber plugs, and setting toe-in/toe-out.
Chapter 10: Wheel Locks
Standard and Uni-Lock Wheel Locks
Adjusting, replacing, and configuring standard push-to-lock and Uni-Lock wheel locks.
Composite Scissor Locks
Instructions for adjusting, replacing, and removing the spring from composite scissor locks.
Chapter 11: Casters, Forks and Caster Pin Locks
Front Caster and Fork Replacement
Steps for replacing front casters and fork assemblies on various models.
Caster Pin Locks
How to engage and disengage caster pin locks for SX, X, 2GX, Aero X, and TX models.
Adjustable Caster Angle and Position
Procedures for adjusting caster barrel angle and caster position on different wheelchair models.
Floating Casters
Instructions on setting up floating casters for improved maneuverability and ride comfort.
Chapter 12: Rear Wheels
Rear Wheel Removal and Replacement
Procedures for removing and replacing rear wheels with quick-release or quad-release axles.
Handrim Replacement
Warning and procedure for replacing handrims on rear wheels.
Rear Wheel Spacers
Instructions for adjusting rear wheel spacing using spacers.
Chapter 13: Anti-Tips
Adjusting Rear Anti-Tips
How to adjust the height and position of the rear anti-tip device.
Mounting Rear Anti-Tip Receptacles
Procedures for mounting anti-tip receptacles for SX, X, TX, XC, 2GX, and Aero X models.
Need help?
Do you have a question about the XC and is the answer not in the manual?
Questions and answers